pawitter parmar
Member
Hello Every One,
i'm going out of business i know it's SAD but that life. Show must go on.
Selling each and every thing i have or listed in this form if this is more confusing for all of you guys you can contact me on my cell +91-987-861-7299 or my son TJ 647-823-6964 WhatsApp me or TJ same number or email me at : pawitterparmar@gmail.com these are the fastest way contact me sorry i don't go on Reduser more often to check my PM etc..
Prices in Canadian dollars.
payments can wire transfer canaidan accounts etc. i am Canadian my self & I'm 200% Genuine buyer & seller many years on Reduser buy with confidence guys . All of my gear setting in toronto, Canada residence can ship world wind . Thanks
The Blackmagic Design Studio Converter 2 inputs SDI video signals transmitted over optical fiber and converts the signals to SDI for use with video switchers. When used in conjunction with the Blackmagic Design ATEM Camera Converter, you can send video signals up to 28 miles between camera and switcher using available optical fiber cables. By comparison sending an HD-SDI signal over traditional copper cable is usually limited to about 300 feet, depending on the quality of the cable.
A typical set up using the Studio Converter 2 is to connect it between the switcher and up to four ATEM Camera Converter units. This set up allows the Converter 2 to receive the signals from the fiber cable, convert the signals to SDI using 10-bit processing, and send the signals to the switcher. The Converter 2 supports SD/HD signals, and when using the available ATEM Camera Converter you can use any camera with an SDI/HDMI output.
The converter 2 can also be used as 4 independent simultaneous bi-directional SD/HD-SDI to optical converters. The converter 2 features a built-in mic input, speaker and headphone jack that provides talkback audio for communicating with camera operators. The Converter 2 passes tally signals embedded in the SDI program stream. You can cascade multiple ATEM Studio Converter 2 units together when using more than 4 cameras. The Studio Converter 2 features a 1RU design with built in rack mount ears for easy integration into existing studio configurations or production cases.
PRODUCT HIGHLIGHTS
4 Bi-Directional Converters in 1RU Unit
Optical Fiber Signal Range 28 Miles
Connects up to 4 ATEM Camera Converters
4 x Fiber to SDI 10 bit Converters
4 x Switchable SD/HD-SDI Outputs
Camera Talkback with Select, Vol & Mute
Connect to ATEM Switchers/Converters
Supports SDI Switcher Tally Output
Send PGM Feed to Fiber Connected Cameras
i'm going out of business i know it's SAD but that life. Show must go on.
Selling each and every thing i have or listed in this form if this is more confusing for all of you guys you can contact me on my cell +91-987-861-7299 or my son TJ 647-823-6964 WhatsApp me or TJ same number or email me at : pawitterparmar@gmail.com these are the fastest way contact me sorry i don't go on Reduser more often to check my PM etc..
Prices in Canadian dollars.
payments can wire transfer canaidan accounts etc. i am Canadian my self & I'm 200% Genuine buyer & seller many years on Reduser buy with confidence guys . All of my gear setting in toronto, Canada residence can ship world wind . Thanks
The Blackmagic Design Studio Converter 2 inputs SDI video signals transmitted over optical fiber and converts the signals to SDI for use with video switchers. When used in conjunction with the Blackmagic Design ATEM Camera Converter, you can send video signals up to 28 miles between camera and switcher using available optical fiber cables. By comparison sending an HD-SDI signal over traditional copper cable is usually limited to about 300 feet, depending on the quality of the cable.
A typical set up using the Studio Converter 2 is to connect it between the switcher and up to four ATEM Camera Converter units. This set up allows the Converter 2 to receive the signals from the fiber cable, convert the signals to SDI using 10-bit processing, and send the signals to the switcher. The Converter 2 supports SD/HD signals, and when using the available ATEM Camera Converter you can use any camera with an SDI/HDMI output.
The converter 2 can also be used as 4 independent simultaneous bi-directional SD/HD-SDI to optical converters. The converter 2 features a built-in mic input, speaker and headphone jack that provides talkback audio for communicating with camera operators. The Converter 2 passes tally signals embedded in the SDI program stream. You can cascade multiple ATEM Studio Converter 2 units together when using more than 4 cameras. The Studio Converter 2 features a 1RU design with built in rack mount ears for easy integration into existing studio configurations or production cases.
PRODUCT HIGHLIGHTS
4 Bi-Directional Converters in 1RU Unit
Optical Fiber Signal Range 28 Miles
Connects up to 4 ATEM Camera Converters
4 x Fiber to SDI 10 bit Converters
4 x Switchable SD/HD-SDI Outputs
Camera Talkback with Select, Vol & Mute
Connect to ATEM Switchers/Converters
Supports SDI Switcher Tally Output
Send PGM Feed to Fiber Connected Cameras
