best c stands

Sounds like you went for two Softpanels! I bought one myself.

I'd get two Matthews beefy babies w/wheels or a Matthews c-stand riser w/the Kupo wheeled base. I'm starting to move all my beefy babies and c-stands to wheeled versions. So much easier when roaming around an indoor set and my grips and PAs love me for it.

Yes! I did! Honestly, I am so excited about these lights (picked up the two 2x1 pledge) I've become like a spokesperson for them lol. If you've seen my poor experience with trying to save money on lights or my experience with LEDs in general you likely wouldn't blame me though lol.

I was thinking wheels also but my small studio isn't that big. Can I just add wheels to a beefy baby in the future? (meaning I can just use the riser) Was looking at getting a pair of these: http://www.bhphotovideo.com/c/product/139498-REG/Matthews_387030_Hollywood_Beefy_Baby_Stand.html

Albeit they are a bit pricey. Could get two Kupo C stands with sliding leg or quick release legs and I'd get them in black for less reflection. However, if you're recommending the beefys, perhaps it is better I spend the extra money.

I could just go 20" honestly and save the money there. I don't think I need 40" anyway. The height on the 20" should be plenty.
 
The best c-stands available are American Grip. I have 2 of the spring-loaded and 2 rocky mountains. The beefy-stands are decent, but if you want a c-stand there's no doubt. The best place to buy them is Adorama.

I'm also in the SoftPanels club... but regardless of that... American c-stands. Zero doubt. The best.
 
The best c-stands available are American Grip. I have 2 of the spring-loaded and 2 rocky mountains. The beefy-stands are decent, but if you want a c-stand there's no doubt. The best place to buy them is Adorama.

I'm also in the SoftPanels club... but regardless of that... American c-stands. Zero doubt. The best.

Taking into consideration my situation, would you still go American c stand over beefy? The only thing that concerns me a bit is portability. Or the lack thereof.
 
I can get my Avenger C-stand in the back seat of my Buick Park Avenue. That's my grip truck since my F-150 died.
 
Taking into consideration my situation, would you still go American c stand over beefy? The only thing that concerns me a bit is portability. Or the lack thereof.

Honestly, those Matthews Beefy stands look really nice, and I like the sliding leg. For "regular" stands... mine are all Matthews. My commentary was directed towards c-stands specifically, but American also makes beefy stands... The downside for "regular users" for American's beefy-style stands is they're over-built for standard use... i.e. junior-pins, etc. so they're heavy even though American c-stands are close to the lightest... within a few ounces.

That Matthews stand looks like a solid choice. I'd buy it. I love that style... all of the anodized leg-support models are nice. That's a quick way to recognize a quality stand. (It sounds stupid, but show me one with that look, that isn't also a really good stand.)

For years, I've had the steel Matthews stand linked earlier in this thread... the one that USED to be $87, but is now $119. That's a decent stand, but the top riser is thin and flexes under load. More than the top riser of a c-stand (and if you've ever put weight on one of those you know the flex) and it has the small locking knobs. If you put it next to the Matthews beefy you'd have zero trouble deciding which one you wanted... It will be the stand you're asking about. I'd never put anything over 10 lbs on the Matthews stand for $119... but that Matthews Beefy should be perfect for the SoftPanels. I may buy two of them myself.

(I have tons of other Matthews stands too. They're all good. Matthews doesn't make any bad stands.)

The other point about stands and weight... is if a 13 lbs stand is almost as stable as an 8 lbs stand with a 10-15 lbs sandbag, I'd rather move the 13lbs stand and know it doesn't HAVE to have a bag on it. I'm all about getting the most done, with the lowest total weight schlepped around (while still being safe of course). That Matthews Beefy might not need a bag when used in a studio setting, depending on height, but a c-stand most definitely will need a bag with a 16.5 lbs light on top, even at it's minimum height.
 
Meh... can't agree with you on the Matthews stands. The need to adjust the bottom post clamp on the Matthews Combos and Lowboys (in addition to to the clamp at the top of the legs), every single time you setup or pack down their stands is an absolute pain in the arse, and a stupid design decision. It makes the stands longer than they need to be, and just downright annoying to setup - especially when you can get something like the Avengers that only require the one clamp to be loosened.

I also picked up a couple of their c-stands, but they rattled so much when you shook them, that I just couldn't feel comfortable putting lights worth thousands of dollars on them, so I returned them and spend the extra to get Avengers instead (which are rock solid).
 
I take off the bottom knob on my Matthews stands... and red Loctite a stainless stud in there. Some guys see that and think I reduced the flexibility of the stand, but I've never had a time I wanted that center post to slide down. My endorsement of the Matthews stands is for their mid-level stuff... like this beefy and down.

I don't have any Matthews c-stands... only their other stands... like medium kit, maxi, etc.

The last gen Avenger c-stands weighed a ton, but it looks like their current stands beat American by a few ounces. I'd love to weigh them both and see if their specs are correct. (That's one of my pet peeves... the listed weights on grip stuff is often incorrect... and nobody ever says anything about it.)

I gave away a new light/heavy 3-riser because it was overkill for a boom... and uh... now I'm sort of regretting it. I still have 2x light/heavy 2-riser, which say they can take 25lbs, but I wouldn't trust them with that kind of weight. I don't think I'd even try the 16.5. I'll be happy to get the lights and see how they ride on a stand. Having the ballast/battery stationary on the pin should keep 1/2 the weight consistently on the center of gravity.
 
Awesome replies. Thanks for bring thorough Mattin. I figured you were speaking specifically about c stands which is why I asked for clarification.

Beefy it is. I agree the design is nice as well although I would perfer a less reflective coating a la matte black. Nevertheless, these stands should be an excellent starting point for my lighting kit.

Thanks again.
 
I'd throw in: take a look at the Kupo HD combo (steel). Last i checked, still about $150 and free shipping from Adorama. That's a hell of a deal if they're as good as their specs. Having a junior head up there is maybe a bit overkill, but you do get the popup baby pin.

Regarding the wheels - yeah, they are f@$&king expensive!!! Get 'em if you need 'em. I find having a couple wheeled stands is handy, I tend to use them for 20"+ monitors and boom mics for some reason. Get one stand wheeled up, if it becomes your main squeeze, you'll know you need more wheels.

Keep an eye out for used beefies, but make sure you get steel and not aluminum if you're paying a fair amount. Not that the alu beefies are "bad", but they seem like the top tubes could buckle with a lot of weight. They're awesome for getting a flag or card up really high, and you can fly a 4x8 panel on them if it's 9' or so (I have two). Just fine for fresnels and such without using that last little skinny riser. Pyramid films usually sells pairs of aluminum beefies for like $175, they can be handy to have and I'd often prefer them to a c-stand if you can get 'em cheap. I just don't trust them at eleven feet in the sky with anything more than flagging off some high light or sticking some cookie/tree-branch stuff into the light path.

But a steel beefy? Your kid will shoot his zombie flick with it some day.
 
I'd throw in: take a look at the Kupo HD combo (steel). Last i checked, still about $150 and free shipping from Adorama. That's a hell of a deal if they're as good as their specs. Having a junior head up there is maybe a bit overkill, but you do get the popup baby pin.

Regarding the wheels - yeah, they are f@$&king expensive!!! Get 'em if you need 'em. I find having a couple wheeled stands is handy, I tend to use them for 20"+ monitors and boom mics for some reason. Get one stand wheeled up, if it becomes your main squeeze, you'll know you need more wheels.

Keep an eye out for used beefies, but make sure you get steel and not aluminum if you're paying a fair amount. Not that the alu beefies are "bad", but they seem like the top tubes could buckle with a lot of weight. They're awesome for getting a flag or card up really high, and you can fly a 4x8 panel on them if it's 9' or so (I have two). Just fine for fresnels and such without using that last little skinny riser. Pyramid films usually sells pairs of aluminum beefies for like $175, they can be handy to have and I'd often prefer them to a c-stand if you can get 'em cheap. I just don't trust them at eleven feet in the sky with anything more than flagging off some high light or sticking some cookie/tree-branch stuff into the light path.

But a steel beefy? Your kid will shoot his zombie flick with it some day.

oh my. I think the Kupo combo is my cup of tea. Specs are great, foot print isn't ridiculous, steel construction, better head, pop up baby pin for the lights... For $150.

Just to confirm, you're talking about http://www.adorama.com/KUS200112.ht...mir9gX_kBzTtex-xaFRZ0h3A_3q2N--YoBBoCrsTw_wcB
 
I have two of those Kupo stands. While I don't have anything else to compare them to, they're fantastic considering their price...
 
I have not tried the Matthews digital combo.

I have used those Kupo style combo stands with rollers. One thing to think about, they are a little on the heavy side when it comes to carrying over a distance. I also feel it's a good idea to not limit yourself with only having one stand type available depending on the location environment. While it's nice having quality light stands like a Beefy Baby or Combo Stand, I wouldn't want to be without real C-Stands. Something else I carry, are what I consider smaller medium duty stands which fit into a small tripod pouch. I use these when I'm in sudo stealth mode, say shooting an interview in a very small office space where bringing in my bigger stands just won't fit the footprint of the office space. If you are an owner operator and not renting, having a scalable kit is key to covering different size jobs.

All the best!

Dave
 
The specs on that Kupo say it weighs over 20lbs. I've been sitting back and waiting for somebody to comment on that... so far "a little heavy" is it. For comparison, a c-stand is about 12 lbs. I can see why this thing says it holds 88 lbs. If I start adding beefy to the mix, even at the bargain price of $155... that weight gives me pause.
 
Has anyone used that new Matthews digital combo ^^^^?

I just picked up a used one yesterday and it feels pretty good. Nice wide base. Not too heavy and interestingly enough it has springs in th risers. In case you slip when lowering a heavy light etc. I didn't expect that. One difference I feel is where they may be cutting a corner is the mixed metals they use on the stand. Not sure how to describe it but seems slightly cheaper feeling than the Hollywood combo. Maybe I'm just being picky. I'm still gonna keep it. The thing is bigger than I really need at the moment but if someone were to fly a 6x on one stand indoors I believe I'd be ok. The base is huge and the center assembly seems the same as the Hollywood version.
 
I'll totally give a +1 for having lightweight aluminum tripod stands in your kit. The last 6 months I've been doing piles of interviews - CEOs, customers, testimonials, etc… I've really gotten it down to 1 rock-n-roller cart to get in and out.

I have a several manfrottos and oddly enough, the stands that came with my gooseneck-biax flolights are really good stands. (The lights are kinda crap though!)

For indoor corporate work, I try like hell to see the location or get someone to text me some phone pics, and I'll know what level of light to bring, which I break down to quad biax, 400 HID softbox, or 575 par depending on how bright the room is. I can generally get the biax quad and the softbox/ballast kit in one case, along with popup diffusion and reflectors, and have another case with a 150 HID fresnel, and a couple LED panels for hairlights or details in the BG. (And I usually have the 575 in the truck in case there's a nice window office we can grab).

So for those gigs, I have a big heavy canvas stand bag that I can get maybe 5 aluminum stands in. I'm generally using a key, sometimes a reflector for fill, a hair/cheekbones/shoulder light, and one or two lights for shaping and coloring the BG. So there's 3-4 stands, and it's nice to be able to flag things. So lately, the only "big" stand I take to those gigs is a heavy matthews baby roller & boom for the microphone. Everything else is aluminum stands (but decent quality, not $20 eBay specials). That's simply the only way to get what I need in one solo trip (since many of these gigs are through the big lobby and up the elevator, some buildings are "loading dock only" as well.)

1 trip in and out and no asssistant is a good way to be profitable and be able to say "yes" to more gigs.
 
Back
Top