Recent content by Steel

Little late here, but just came across this thread and saw Charles' post up top about the Samsung T9 drives with a read speed of 2,000 MB/s. Not sure if you're on a Mac or not, but no Apple silicon Macs take advantage of the USB 3.2 Gen 2 2x2 speeds (20 Gb/s). They're all capped at 10 Gb/s...

This happens more on passion/fun projects than on paid gigs, but I sometimes shoot 8K60 raw on the R5C to extract stills later for further editing. I usually get the video image to roughly where I want it (WB, LUT) within FCPX, and then export the frame as a TIFF and tweak it in Lightroom...

I’m running the SDI out on my C200 to an Ninja V with the SDI adaptor. This way the cable locks and is more secure, and I don’t have to deal with an HDMI cable sticking awkwardly out the left side of the device. But I can’t seem to get peaking to work with either SDI or HDMI (output from the...

Is there any way to get the C200 waveform to follow the LUT when it's turned on? I'd like to turn the REC709 LUT on for the video output and then have the waveform update for that. The manual says 'The waveform monitor will not be affected even if a LUT is applied to the clip's video' which...

Well, I really seem to be on here a lot when things don’t work/break… I’ll have to contribute something useful sometime…! Got the Z-Cam EVF in the other week and was hoping to connect it to my 1DC as we all know how useless that camera is when trying to monitor things. Long story short, no go...

I was doing an interview shoot the other day, and only about 5 mins in I look over to the Odyssey 7q monitor and see some weird artifacting. Thought it was maybe just the monitor acting out. I was shooting 29.97 raw to ProRes HQ via the SDI 1 output. After the first take I check the playback and...

Trying to diagnose why I'm not getting any audio from the Mic in port. Have followed what the manual says, and how it's supposed to be the number 1 port, with priority over the XLRs. To that end I've tried it with a powered shotgun mic, but still nothing (with the top monitor unit unattached)...

So I ordered the Wooden Camera Recorder Slide a while ago and it finally shipped to me. I know it works with the 7Q because well, it says so in all their videos and it has holes for it on the unit itself. Problem is, I have no idea how to mount it! The only hole that lines up is the mounting...

Just like that the title says...I can't seem to figure this out. I can get 4K RAW @ both 60fps and 120 fps to work, but can't get 120fps for the YCC 10-bit video. Camera is set to 10-bit YCC, 59.94 (defaults to this), slow & fast motion on, set to 120 fps... Odyssey set to 2K/HD 4:2:2 to...

Not sure if this is the right thread for this, but I couldn't find a dedicated monitor/recorder forum. Anyway... I picked up two 1TB Samsung EVOs, which are supported with the 2018.03 firmware update for the Odyssey, and tried plugging them in. One was actually DOA, and I just stopped by the...

I recently picked up a C500 and Odyssey 7q. Icing on the cake would have been if it was the 7q+ so I could get 10 bit 4:2:2 out of my EOS R to boot. I searched the forum a bit and it seems years ago people were trying to get 1080p60 out of the original Sony a7s to the Odyssey 7q via HDMI to SDI...

Hey folks, So I picked up a used C500, 4 batteries, and Odyssey 7q with RAW update for what I think was a pretty good price. It's only missing the top handle, which most people switch out anyway, and is in very good condition. I Frankenstein'd a rig together with stuff I had lying around at home...