Some of my C4D work...

Update :) I blurred the edges of the can as Tom suggested. I think it helped sell it a lot. thanks Tom
 

Attachments

  • CanBGupdate_1.jpg
    CanBGupdate_1.jpg
    283.5 KB · Views: 0
triple I don't know what you did on the first one, that one had the edges perfect, this one (which is much better) still has some tiny slight zaggies( only very minor) the reflection now looks very good.

I would put a side light, see the highlight on the cap, try and copy that angle.
 
Anhar Miah said:
triple I don't know what you did on the first one, that one had the edges perfect, this one (which is much better) still has some tiny slight zaggies( only very minor) the reflection now looks very good.

I would put a side light, see the highlight on the cap, try and copy that angle.
Click to expand...

Thanks Anhar I will see what I can do with it! :)
 
Fixed the edges this time as Anhar said in my first it was better. And did a few small things. I think I'm done with it now. Next I need to practice match moving and video footage.

CanBGupdate_2.jpg
 
Excellent!

When you start match moving some tips are to use high shutter speeds (because motion blur is not good for tracking, the small errors eventually lead to sliding.)
 
Thanks again Anhar. I usually shoot with 1/48th shutter with my dvx/letus but I guess for tracking test I'll bump it to 1/60th.

Udpate on the can DVX Style.
 

Attachments

  • dvxusercom.jpg
    dvxusercom.jpg
    271.3 KB · Views: 2
triplej96 said:
Fixed the edges this time as Anhar said in my first it was better. And did a few small things. I think I'm done with it now. Next I need to practice match moving and video footage.

CanBGupdate_2.jpg
Click to expand...

I think that looks really good. It's got just the right amount of edge blur and you got rid of the black outline on the edge of the can. I think that black edge is what made it not fit in. Nice job!
 
Tom Marshall said:
I think that looks really good. It's got just the right amount of edge blur and you got rid of the black outline on the edge of the can. I think that black edge is what made it not fit in. Nice job!
Click to expand...

Thanks Tom. I think that one is my best too. I was just playing around with the DVX one.
 
My first attempt at a match move. Syntheyes, C4D, and AE for comping. I didn't spend a whole lot of time lighitng the CG stuff just wanted to see if I could match move and comp everything properly. I used trapcode particluar in AE to make the laserlighting thing and used track matte to place it behind the can and tree.

before/after video
http://www.joshjohnsonfilms.com/matchmovetestsyntheyesC4DAE.html
 
Last edited:
New Castle is good as well Tom but I actually don't drink much these days...Who would of thought I stopped drinking after I turned 21 lol.
 
You must log in or register to reply here.
Back
Top