XLR Star Quad

Kugar13

Well-known member
I am looking into purchasing XLR cables and heard the XLR Star Quad cables (by Canare) are the best. Is this so? If so and I purchase a boom with a XLR cable mounted within that isn't as top quality will I be losing the benefit of the star quads by transferring the sound from a subpar cord to a superior cord? If so, I'll prob purchase a boom pole without a cable and get the star quads...

Any advice would be appreciated. Thank you!
 
Don't worry about that. Any pole you get with internal CC will be fine and if it eventually wears out you can replace it... you need a good friend to smack you.

StarQuad comes in standard thickness L-4E6S and thin L-4E5C but the "star quad" configuration isn't exclusive to Canare... Belden and other companies also produce very high quality "star quad" cable. People like Canare for it's flexibility, feel, and durability... but whatever you get in the pole will have been a conscious choice by the manufacturer... and if you go with something like K-Tek then their reputation is important enough that they wouldn't give you a junk cable to save fifty cents.
 
you dont need star quad internal cabling at all , the star quads good if you are running over dimers and power lines, especially good if you run mike level ,then it must to eliminate hum and dimmer bzz .
for normal situation you can work with regullar good microphone cable , not nesseraly star , mogamy, clotz , belden, gepco ,canary and every others that i didnt mention
 
Hey the Musilux came today... I guess I should stop posting "first impressions" because they change so much before I make up my mind.

This stuff is butter-soft. It's pretty clear they were gunning for Canare with the design... although it's not a "star quad" configuration.

I'll probably still build some cables with it though... but don't ask yet because I'm waiting on some other stuff. I want to verify the resistance, capacitance, effectiveness of the shield, and weight per foot before I order an entire spool. If all that specs out on par with Canare Star Quad then we'll be in business.

The statements that this cable has no memory are exaggerated though... while it has significantly less memory then Canare I sure wouldn't use the term "no" memory. I guess I'll have to decide if I think it's worth it to use this over Canare. It would be more trouble and it's far less accessible... and then the cables would have to cost a little more.

When I get all this decided you'll see it on the forum. I didn't think this warranted a new thread and it's directly related to StarQuad... so if anybody thinks this is a hyjack let me know and I'll edit it.
 
MattinSTL said:
Don't worry about that. Any pole you get with internal CC will be fine and if it eventually wears out you can replace it... you need a good friend to smack you.

StarQuad comes in standard thickness L-4E6S and thin L-4E5C but the "star quad" configuration isn't exclusive to Canare... Belden and other companies also produce very high quality "star quad" cable. People like Canare for it's flexibility, feel, and durability... but whatever you get in the pole will have been a conscious choice by the manufacturer... and if you go with something like K-Tek then their reputation is important enough that they wouldn't give you a junk cable to save fifty cents.
LOL.... smack me.... LOL. Thanks for the info!
 
ExileOnTheMainStreet said:
you dont need star quad internal cabling at all , the star quads good if you are running over dimers and power lines, especially good if you run mike level ,then it must to eliminate hum and dimmer bzz .
for normal situation you can work with regullar good microphone cable , not nesseraly star , mogamy, clotz , belden, gepco ,canary and every others that i didnt mention
I am going to be using an amp for the headphones so the boom operator can monitor the sound on a higher frequency to make sure we are not missing faint sounds that we will regret later in post. Would the amp create a situation where I would need star quads? I am asking b/c I am concerned the amp works for sound as a dimmer works for lights.... thx!
 
MattinSTL said:
Hey the Musilux came today... I guess I should stop posting "first impressions" because they change so much before I make up my mind.

This stuff is butter-soft. It's pretty clear they were gunning for Canare with the design... although it's not a "star quad" configuration.

I'll probably still build some cables with it though... but don't ask yet because I'm waiting on some other stuff. I want to verify the resistance, capacitance, effectiveness of the shield, and weight per foot before I order an entire spool. If all that specs out on par with Canare Star Quad then we'll be in business.

The statements that this cable has no memory are exaggerated though... while it has significantly less memory then Canare I sure wouldn't use the term "no" memory. I guess I'll have to decide if I think it's worth it to use this over Canare. It would be more trouble and it's far less accessible... and then the cables would have to cost a little more.

When I get all this decided you'll see it on the forum. I didn't think this warranted a new thread and it's directly related to StarQuad... so if anybody thinks this is a hyjack let me know and I'll edit it.
What is your fav cable on the parket?

I understand the more 'links' you add to a chain (in regards to sound) you can add more interference/unwanted sound, does this apply to adding multiple cables together? For instance with electrical cords the longer the cord the more voltage you lose over distace per lag (I don't have my notes for exact details), and the more cables used changes the speed and power of the volt due to transferrence at the connectors, yatta-yatta (you get the gist, right?). So, would this apply with sound cables?

thx
 
Anything under 100' is a standard length (under 50' is basically a short length) and I wouldn't worry about the effects of capacitance and resistance. The only reason I mentioned it with the other cable is because you can't get it in less then 500' and if I'm buying that much I'd want it to test out at the top of the charts anyway. So ironically enough I'm telling you not to worry about what I'm worrying about! Really it's not going to matter at the lengths any normal person would be dealing with... and XLR connections are balanced and should be silent unless something is wrong with a connector... so again, I wouldn't worry about it.

The only reason I mentioned those characteristics is because even though we'd be splitting hairs I'd need to know I could actually say "better then Canare StarQuad" and not be lying.

Favorite cable? As of right now I think 99 out of 100 people will say the exact same thing. Canare StarQuad, and by that they specifically mean L-4E6S (even though many of them don't know it) so any cable you get that's made with L-4E6S and Neutrik XLR connectors will be one of the best you can get. People like that brand of cable for it's durability, flexibility, sheilding. To be fair most guys get to this cable and they're so happy with it that they never consider anything else. You won't be dissappointed with the cost/quality ratio either.
 
MattinSTL said:
Hey the Musilux came today...

The statements that this cable has no memory are exaggerated though... while it has significantly less memory then Canare I sure wouldn't use the term "no" memory.

I guess I did exaggerate that a bit. After years of using Musilux around the house, a couple months ago I ordered some Star quad for my location recording rig. I felt like I was wrestling a multichannel snake compared to the musilux. I've been happy with it, but I don't know how it withstands physical or RF abuse. That's why I went with the Star quad for the location rig, since EVERYBODY else seems to use that, and hey, it was cheap.
 
MattinSTL said:
Anything under 100' is a standard length (under 50' is basically a short length) and I wouldn't worry about the effects of capacitance and resistance. The only reason I mentioned it with the other cable is because you can't get it in less then 500' and if I'm buying that much I'd want it to test out at the top of the charts anyway. So ironically enough I'm telling you not to worry about what I'm worrying about! Really it's not going to matter at the lengths any normal person would be dealing with... and XLR connections are balanced and should be silent unless something is wrong with a connector... so again, I wouldn't worry about it.

The only reason I mentioned those characteristics is because even though we'd be splitting hairs I'd need to know I could actually say "better then Canare StarQuad" and not be lying.

Favorite cable? As of right now I think 99 out of 100 people will say the exact same thing. Canare StarQuad, and by that they specifically mean L-4E6S (even though many of them don't know it) so any cable you get that's made with L-4E6S and Neutrik XLR connectors will be one of the best you can get. People like that brand of cable for it's durability, flexibility, sheilding. To be fair most guys get to this cable and they're so happy with it that they never consider anything else. You won't be dissappointed with the cost/quality ratio either.
Wow, I have learned so much in such a short period of time. Thanks for sharing your wisdom!
 
kidtexas said:
I guess I did exaggerate that a bit. After years of using Musilux around the house, a couple months ago I ordered some Star quad for my location recording rig. I felt like I was wrestling a multichannel snake compared to the musilux. I've been happy with it, but I don't know how it withstands physical or RF abuse. That's why I went with the Star quad for the location rig, since EVERYBODY else seems to use that, and hey, it was cheap.
Thanks for the info... I'll have to my homework on Musilux :o)
 
Back
Top