Workflow Set Up - Lavs, to mixer, to recorder to camcorder

prexdealer

Well-known member
I am going to be doing a one man show run and gun doc. I will be following sports team and 2 coaches. So each coach will be laved.

I have narrowed down some of my equipment choices and now trying to think of the best way to set up my equipment and give me some backups (I am a little paranoid).

I will be shooting with a 4K camcorder but sadly it doesn't have dual SD cards, but the cost and 4K option and various other features like stabilization sold me (Sony AX53).

For audio, I am going to get a couple of wireless lavs - looks like the Rode Filmmaker kit will offer me the best option that I can afford.

My plan was to wire the lavs to my Promix Psc 3 mixer. From there to my Dr 60, which can it seems make a lower level db backup file. So I would get each coach at normal volume and then 2 at lower DBs (the coaches do shout!). I am still a little uncertain about this and the unit is a little boxy.

From there I will output from the DR60 in stereo to the camcorder.

My questions:
1) Is there a better way?
2) I thought about grabbing 2 Tascam Dr40s - I am more comfortable with this unit and I know I can make the back up files - problem is another piece of equipment. I looked at DR 05 but I don't think there is a backup file option.
3) Switching between coaches and shotgun mic - I would also like to use my shotgun mic to get some sound of the players. But I would need to switch back and forth from the lavs - anyone know of a good switching mechanism? I am afraid if I am constantly pulling and switching inputs with the mic in on the camcorder that I would do some sort of damage (i.e. fry/short something).
4) Is the audio good enough on the Tascam DR60 good enough that I wouldn't need a mixer? I have used the PSC mixer a few times and have always been happy with the audio. But I am concerned about lugging all this stuff around - I am still not clear on how I will bag all this stuff.
5) Can someone explain shielded and unshielded adapters? I have a couple of wired lavs. The tascam dr 60 has a mic plug that works great, however, when I try a line adapter and plugging it into the XLR pot has a line input, I don't hear anything.

I know this is a bit of a laundry list, but I really want to do a good job, even though there is no pay. But it is a passionate project.

Thanks for your help.
 
You could go w/o the mixer if recording to a DR40 or 60 w/o significant quality loss.. though neither have analog limiters. I'm not sure about the PSC mixer but it's pretty low cost, so I doubt it has input stage limiters. But the Rode transmitters probably don't have limiters either so it's sort of a non-issue.
 
You could go w/o the mixer if recording to a DR40 or 60 w/o significant quality loss.. though neither have analog limiters. I'm not sure about the PSC mixer but it's pretty low cost, so I doubt it has input stage limiters. But the Rode transmitters probably don't have limiters either so it's sort of a non-issue.

Just output limiters.

Thanks, that would reduce my equipment load.
 
Back
Top