I'm trying to attach my teradek TX to my baseplate. It would be perfect to mount it to the Rosette on the side of the base VCT. BUT I can't find anything that makes use of the rosette other then handles basically. Ideally, rosette that becomes a small cheaseplate or just a screw in. Any suggestions. Thanks.
Use Rosette as a mounting point
- Thread starter tonta9
- Start date
NorBro
Major Contributor
Maybe something like this with threads?
https://www.bhphotovideo.com/c/product/1502691-REG/smallrig_md2384_arri_rosette_extension_65mm.html
https://www.bhphotovideo.com/c/product/1502691-REG/smallrig_md2384_arri_rosette_extension_65mm.html
JPNola
Veteran
You can screw an articulated arm into the female threaded hole in the center of the rosette.
Or maybe use this, which is less in price and less bulky than the piece suggested above:
https://www.bhphotovideo.com/c/product/1474928-REG/camvate_c1990_m6_female_rosette_to.html
Or maybe use this, which is less in price and less bulky than the piece suggested above:
https://www.bhphotovideo.com/c/product/1474928-REG/camvate_c1990_m6_female_rosette_to.html
NorBro
Major Contributor
Because the threads are only in one direction on the Camvate, it limits the flexibility for customization - but could actually work out really nicely if the Teradek is able to bolt by the lip, but I'm not sure those two are threads (don't think so).
It's a 2-4 week 'special order' from B&H but Adorama has it in stock:
https://www.adorama.com/cmvc1990.html
It's a 2-4 week 'special order' from B&H but Adorama has it in stock:
https://www.adorama.com/cmvc1990.html
This could be perfect. Going to order. I’ll let you know how it works! Thanks everyone for tips!!!
Run&Gun
Veteran
You mean EVERYONE doesn’t have Prime?! ; ). I thought it was just one of those things, now, like air and sunshine.