Twelco mixer breakout cables

Green Apple

New member
As a new user of the twelco 422 channel mixer just received first impressions are it's a fantastic piece of equipment however now trying to make life easy for myself by incorporating a breakout cable for mix to camera and also using the 5 pin xlr to my h4n for digital recording... Are there any suppliers of these as std... Or will I have to get the soldering gun out and some burn ointment?...
 
Get the soldering gun out (and burn ointment)... or pay one of the usual suspects to custom make one. And it may not be as simple as just soldering the wires to the connectors.. If the XLR-5 is +4dB line level, the H4n does not support that operating level, so some level of attenuation would be needed .. The H4n's unbalanced 1/4" is -10dB; the XLRs, balanced mic level.
I don't believe the Zoom has a digital input, S/PDIF or otherwise, if that's what you mean by "digital recording."
 
Cheers Rick ..... That's not really what I wanted to hear but..... We'll if I have to .... I really hate soldering the hirose connectors yes I understand that it's analogue into the h4n to then be converted to digi wav... Also the 1/4 inputs are line level..?. The 5 pin xlr out of the mixer is unbalanced out plus need phones return from camera and breakout jack at camera for Cam Op to monitor so not to complex to run one up ....just thought I'd save myself the trouble if one can be bought think the Twelco is the same configuration as SQN mixers thanks for your response ....
 
"Also "the 1/4 inputs are line level..?"
Yes, the H4n 1/4" inputs are unbalanced, @ -10dB (nominal), so if your mixer outputs the same unbalanced op level.. your good to go.
I have never encountered a Twelco mixer, but I'd like to peruse the manual if it's available online. All the 5-pin XLRs I've encountered have been bal. audio outputs on 'pro' cameras. (two channels of balanced audio... hot & cold x2; common ground) Most of the field production mixers I've used, had a 10-pin (Hirose) connector for the camera's bal. audio inputs and monitor returns.
 
Thanks Scott.
The Twelco has some nice features indeed. I like the push-button PFL opposed to a rotary multi-switch.
The specs and a few other design features aren't terribly impressive, though probably sounds adequate for non-critical work. It's relatively large, weighs a lot and is power hungry as well, The NP1 battery port may be useful.. but most use external batt.s with a power distribution block for multiple devices. If it had built-in power distribution, that would be something
Don't know the price, but probably a lot less costly than a SD, SNQ or other top shelf mixer.. though the operator's skills and other peripherals have a lot to do with the outcome.
 
Thanks guys.... It's the best mixer I've got......... So it's going to have to cut it for me for a while... In conjunction with the H4n and a slack handful of other bits and bobs..... The spec looked pretty good to my non critical eyes.... I'll put it through its paces on a couple of jobs over the next few weeks and do a detailed review... Seeing as there is very little info out there about it.
 
The thing with specs is that there is no "standard" that they are done to so some look great and are hyped because of how they measured and some look not so great but in fact are better than the hyped ones that read well.

It should be pretty good. It was aimed at the pro market and it's built like it was designed by someone who actually knew something about field mixer needs so... The battery consumption looks high because you need to stick eight batteries in it but if it really gets a solid eight hours with phantom then it's in the same ball park as other mixers. And you could use NiMh rechargeables and keep the costs down. It's not lacking in functionality and I suspect it will sound a lot better than the specs would lead you to assume.
 
Back
Top