source fo extra case/bag dividers

[forbyfiev]

Is it possible to buy extra dividers one or two at a time? It seems I always need one more or different than I get with the kits. this applies to different manufacturers.

 

[EspenGlomsvoll]

Treckpack devider system? Im not sure what bag/case you have (soft, hard).

 

[forbyfiev]

that was one I was hoping to use, but Pelican will not sell me the divider set for one case, the 1557.

 

[patrickbaldwin]

DIY!
https://improvephotography.com/53143/diy-a-trekpak-padded-divider-system-for-40/

I had saved a link from Petapixel outlining how to do this but it has been removed from their site!

 

[EspenGlomsvoll]

Trekpak divider set on B&H
https://www.bhphotovideo.com/c/product/1082377-REG/trekpak_0300_10_1650_foam_insert_for_pelican.html

 

[forbyfiev]

that DIY is clever.

unfortunately if you already have the case, such as my 1557, the trekpak is not available.

I'd love to be able to buy a couple of say, 8"x9" regular velcro dividers....

 

[patrickbaldwin]

I bought a Trekpak divider kit for a 1620 case. There wasn't enough in the kit to fully kit the case. It wasn't all small stuff that would require a lot of dividers either. I had a Nikon 200-400 in there that was almost the length of the case and a third of the width and I had to buy more just to make a workable case full. I complained and they offered me a discount on the carriage.
The other problem with it is that it is only pinned at the top if you want to be able to quick change and with the weight of stuff in my case, 4 bodies and 4 - 6 lenses when the case is up on its wheels all the dividers shift at the end in the base of the case that isn't pinned thus causing me to constantly shift dividers back into place in order to get cameras in and out. NEVER AGAIN.
Apologies for my little rant. It cost me a fortune to get a case that actually doesn't really work.

 

[forbyfiev]

thanks for the info Patrick