Senn EW100ENG question

J

jaredalv

Well-known member
Looking at buying the above package. I'm wondering: can the plug-in module be coupled with the ME66? And if so, Does this package allow for both the plug-in and the lav to be transmitting simultaneously? Or is this a one or the other set-up and I would need a second receiver to acheive them both running together?

Thanks,
Chico
 
Re: Senn EW100ENG question

you can plug the me 66 to bat plug if you have battery powered mike , if its only 48ph you need eather ph 48 phantom suply or another bat plug , , you can only transmit one link each time or the bat or the lav ,
the 500 have 48v on bat plug , another benefit is line level out or headphones, more fq to chooze and bigger hol in the pocket:-)
 
Re: Senn EW100ENG question

its metter , the letters are spesific to your fq block , check befor buing if you have clean chanels in your eria ,lectrosonics and zenhizer have tv chanels chart for each city in US , but it changing all the timeso better to scan or usk someone what frqvensies are working in your toun (look for soundman , the guy who dont like your camera(poor hradphone out and a2d2a dilley :-))
 
Re: Senn EW100ENG question

Exactly. The A/B/C variants are identical electronics that happen to work on different portions of the frequency spectrum. Sennheiser has a chart somewhere on their site that shows what UHF channels are active in major market areas, which may help you avoid interference.
 
Re: Senn EW100ENG question

thanks gentlemen! just put in an order w/ rush and he confirmed that the A frequency is for the los angeles/orange county area!
 
You must log in or register to reply here.
Back
Top