Sachtler Flowtech 75 MS Carbon Fiber Tripod on B&H Deal Zone

Expensive is kind of relative.

I actually think the Flowtechs are a great deal.

So you've been able to treat them just like a tripod? Not trying to be sarcastic. I have a Vinten, the people I work with use Sachtler, O'Conner, etc. You expensive stuff that lasts forever. So after using it a while, your Flowtech feels up to those?

Thanks!
 
Expensive is kind of relative.

I actually think the Flowtechs are a great deal. Speaking directly about the 100mm’s(because that’s what I have), even buying them on initial release, it cost me less to get into a full set(legs, mid-spreader, feet & handle) than it does(did) a 100mm set of Speedlocks(legs, mid-spreader & feet).
I actually have the predecessor to the flow tech (which has a design flaw with the locking mechanism). I still love it and use it. By expensive, I mean I have many pieces of equipment. I've found it better to have more tools than just one really expensive. For example I must have 5 different tripods. One has a center column that allows me to get up really high over people's heads, another as a lock light lock off, another with a good smooth pro head, etc. So If I only had one camera and tripod that I used exclusively yeah I wouldn't care about the price. One other thing I don't care for is the non cylindrical legs. I often need to mount a Atomos monitor on a magic arm that gets clamped to the legs.
 
Even if you have multiple tripods, it usually makes sense to have one good one. I have a good and heavy one, an okay light one, and a few cheap dogs for lock-offs. Which sucks when you occasionally have to operate the lock-offs

But yeah, a good tripod is very expensive. So is a good camera, but the tripod will be useful for way longer
 
Last edited:
I have these sticks. They re fantastic. Every time I change height I remember what a PITA is was before. If you can get a good deal on these legs, take it.
 
often need to mount a Atomos monitor on a magic arm that gets clamped to the legs.

FYI, the Flowtech tripods ( I own a 75mm and two 100mm) all have three 3/8" sockets at the base of the head (between each leg) for mounting accessory arms, handles, straps, or whatever you want. Clamping something to the legs and possibly damaging the carbon fiber is not needed. I appreciate the shape of the legs every time I have to carry the sticks a long distance on my shoulder.
 
FYI, the Flowtech tripods ( I own a 75mm and two 100mm) all have three 3/8" sockets at the base of the head (between each leg) for mounting accessory arms, handles, straps, or whatever you want. Clamping something to the legs and possibly damaging the carbon fiber is not needed. I appreciate the shape of the legs every time I have to carry the sticks a long distance on my shoulder.
Thanks Doug. Good to know that would work for most situations. Often when I'm filming in theaters, I have to have the camera up high but I need to film from a sitting position so as not block the view of audience behind me. That's why I mount the monitor down low on the leg. But that 3/8 socket would work for standing position work.

Ok I'm going to buy one! When's the next sale? :-)
 
Ok I'm going to buy one! When's the next sale? :-)

I'm not sure if it will happen this year, but last year at the end of the year, B&H reactivated all the year's deal zones at the same time. It might have been the week after Christmas.

If they did that, I'd be very tempted to get a flowtech. But I think I'd hold back with the if it ain't broke dont fix it mantra. Most of the time that I have to move fast, I'm no longer on a tripod anyway

But they sound sweet

PS is anyone using an Aktiv head?
 
So you've been able to treat them just like a tripod? Not trying to be sarcastic. I have a Vinten, the people I work with use Sachtler, O'Conner, etc. You expensive stuff that lasts forever. So after using it a while, your Flowtech feels up to those?

Thanks!

I'll put it this way: My first tripod(back in the 90's) was a set of Vinten CF Pozi-Locks(100mm). Then I bought a set of Sachtler CF Speedlocks(100mm). Then another set of CF Speedlocks(100mm). Then a set of HD(heavy duty) CF Speedlocks(100mm). And a Vinten mini pedestal that came with the 250 I bought last year. The Pozi-Locks shuffled off 13 years ago. All of the Speedlocks are still working perfectly. But the Flowtechs are my hands down favorite set. They are my 'A'/day-to-day set. I've even put my Vinten 250 on them. They are not rated to take the payload that the HD Speedlocks can(200lbs+), BUT they are way more rigid with no perceptible torsional twisting or backlash. And as Doug mentions, the shape of the legs are great when you actually put them on your shoulder to carry. A buddy of mine actually bought two pair after seeing mine right after I got them when they came out. My only real complaint is that the magnets for keeping the legs closed for transport are actually WAY too strong. And my biggest suggestion for a tweak would be to make the hinges tensioned like on Gitzo's, so that you could operate without a spreader, if you'd like.

Sachtler and Vinten really nailed this one.
 
I actually have the predecessor to the flow tech (which has a design flaw with the locking mechanism). I still love it and use it. By expensive, I mean I have many pieces of equipment. I've found it better to have more tools than just one really expensive. For example I must have 5 different tripods. One has a center column that allows me to get up really high over people's heads, another as a lock light lock off, another with a good smooth pro head, etc. So If I only had one camera and tripod that I used exclusively yeah I wouldn't care about the price. One other thing I don't care for is the non cylindrical legs. I often need to mount a Atomos monitor on a magic arm that gets clamped to the legs.

I have a buddy with a few sets of the Vinten Fibertecs. Several years ago, Vitnen actually tried to buy his original set back from him.

I wish I could have gotten a set way back then, but they were not cheap and I couldn't justify buying them at the time when my Pozi-Locks were still working. And they were only available for a very short time. They cost Vinten a ton to manufacture.
 
I have a buddy with a few sets of the Vinten Fibertecs. Several years ago, Vitnen actually tried to buy his original set back from him.

I wish I could have gotten a set way back then, but they were not cheap and I couldn't justify buying them at the time when my Pozi-Locks were still working. And they were only available for a very short time. They cost Vinten a ton to manufacture.
I'm referring to the Sachter speed locks. So you have one lever locks/unlocks both stages. The cam/shaft wears or starts to twist, then the legs in the lock position can suddenly give out without notice. I tried shimming them that helps but then the second stage sticks and won't deploy. The only fix is to order and install new cam at over a hundred a pop. I've done it for one leg but need to do it for the other, I've noticed second starting to slip I should order a new cam before it acts up on a job. Otherwise I love it light, rigid and quick to deploy.
 
I'm referring to the Sachter speed locks. So you have one lever locks/unlocks both stages. The cam/shaft wears or starts to twist, then the legs in the lock position can suddenly give out without notice. I tried shimming them that helps but then the second stage sticks and won't deploy. The only fix is to order and install new cam at over a hundred a pop. I've done it for one leg but need to do it for the other, I've noticed second starting to slip I should order a new cam before it acts up on a job. Otherwise I love it light, rigid and quick to deploy.

Ah. I thought you were referring to the real forerunner, the Fibertec's.

As much as I love my Speedlock's, they feel glacial in comparison when deploying them. But compared to Gitzo's or other similar style legs, the Speedlock's feel like Flowtech's.

I've had one leg/stage on my HD set slip some, but it's the nut on the clamping mechanism loosening. I can tighten it back down and it's fine. I probably just need to put some Loctite on it.
 
Adorama's deal of the day has the Flowtech 75 + FSB8T head for $1999. That's what it normally costs to get the 75 sticks with the ACE XL head, which is nowhere near as nice as the FSB8T. Though, the latter is also not amazing. I prefer my old O'Connor 515 by a large margin. Still, this is a great deal for a new head and sticks.

https://www.adorama.com/sc0795.html
 
Adorama's deal of the day has the Flowtech 75 + FSB8T head for $1999. That's what it normally costs to get the 75 sticks with the ACE XL head, which is nowhere near as nice as the FSB8T. Though, the latter is also not amazing. I prefer my old O'Connor 515 by a large margin. Still, this is a great deal for a new head and sticks.

https://www.adorama.com/sc0795.html

interesting, that product is no longer available at B&H: https://www.bhphotovideo.com/c/prod...0795_system_fsb_8_sideload.html?fromDisList=y

they must be clearing stock
 
Yeah, I think they must want the aktiv(6/8/10) line of fluid heads to become more standard.

Yeah, I'm thinking the same thing. I'll wait until there is a group buy on the Aktiv 8. I have the 75 flowtechs already but need to sell of the ACE CL head that came with mine. I'm in no rush though as I already have better 100mm heads for most of my work. I just really want a fast deploy setup that is fairly lightweight for speedy doc situations. My miller setup is not fast, and once there is a bunch of weight on it, those twist locks are a total PITA.
 
Yeah, I'm thinking the same thing. I'll wait until there is a group buy on the Aktiv 8. I have the 75 flowtechs already but need to sell of the ACE CL head that came with mine. I'm in no rush though as I already have better 100mm heads for most of my work. I just really want a fast deploy setup that is fairly lightweight for speedy doc situations. My miller setup is not fast, and once there is a bunch of weight on it, those twist locks are a total PITA.

I plan to get a flowtech 75 with aktiv8 head, a well-timed group buy sounds like the way to go. It'd be great to see some long term aktiv reviews too.

I'm still using a miller AIR which is fine unless you plan on moving the camera or the moves are extremely basic. I've been hiring better fluid heads when needed but would rather own, particularly such a basic piece of gear.

Not needing to thread the fluid head and instantly going from tripod/slider/jib would be amazing.
 
Back
Top