redrock nikon mount stuck

[Steve Laramie]

Got my Redrock m2 with a microx flip and a nikon mount setup for the first time. I put a variety of lenses on and they all have the same problem. The silver release switch is rediculously hard to push. You have to get your nail in there and push as hard as possible for it to release. does this just need to be warn? or do I have a problem. The adapter isnt even a day old.

 

[Steve Laramie]

Anyone? this really sucks...

 

[Will Clegg]

I have never had a problem with mine... I got it second-hand but it always worked great. did you email Brian or Andrew? Or post at the redrock forum?

 

[stinkpot]

I have the pentax mount but I'm sure it's very similar as far as button style. I've noticed this on several other adapters (macro, brand to brand, etc.) as well... that they don't push in like the camera's release button. What I've found is that you need to pull the end of the tab (with your finger nail) away from the M2/camera while pushing the base of the tab towards it. That way it releases easily. It takes some practice and angling but once you have it down it feels normal.

Hopefully that helps.

 

[Steve Laramie]

iv found a good method with a small flat head screw driver i can gently get in there and release it now

 

[Joseph Stunzi]

I had the same trouble the first few times I used my M2. However, over time this really get's a whole lot better!

 

[Steve Laramie]

I would never do this without checking with you guys obviously but would it be safe to put a tiny bit of wd40 in there?

 

[Joseph Stunzi]

It should be fine. However just move work it in by hand when there's no lens on the mount. Should be good enough.