patch into sound system

Talking Eyes

New member
I am going to be shooting at an event and would like to patch my DVX100A into their sound system. I have never done this. However, I do know that I need some sort of adapter. What do I need exactly? Thanks.
 
Depends on what kind of mixer they have. If the mixer has multiple sets of main outs, then you might be able to patch into that. If not, they may use an aux send from the mixer to you. Different mixers use different connectors for this. You will need to find out what mixer they are using, and which outputs they plan on giving you. Most likely you will need just a regular XLR cable, or a quarter inch to XLR.

-Dave
 
i have done this a lot with a huge variety of equipment configurations to connect to.

the biggest question is, are you going to be shooting from a place where you would be close enough to safely run an xlr cable to the sound board?

if so then just run an xlr cable to the sound board (or if they have the really good pro speakers they have xlr in/out on the back of each speaker)

if your connecting via wire you just need the long xlr cable + a whole selection of adaptors.

you need to have everything on hand because unless you have time to talk to and preferably hook in and test ahead of time your've got to be preparred.

i have a kit with adaptors for everything from xlr gender changers to 1/4inch, rca male or female etc.

i have a kit with a crazy set of connectors and i'm still adding things here and there as i run into situations.

here is a link to trewaudio.com they offer a nice kit with a huge selection.

not saying you need to buy the one from them but there list of connectors is a great list to show what you could potentially run into.

i have built my kit one or two adaptors at a time but if i had gotten them from trew or someone like that it probably would have been cheaper.

http://www.trewaudio.com/catalog/items/item629.htm

matthew
 
Bring a variety. Ask but I would still bring some others. Basically RCA, XLR and 1/4 phono should cover it. I would also bring an isolation box (hum eliminator) if you have one. I have had some unbelievably noisy feeds, and I don't do this much.
SK
 
Back
Top