new at audio, help.

Hey New to this forum,

So, I have taken each short to focus on certain things. I did one with no sound and focused on camera movement. Then i made another one with sound but focused on lighting. So now i am putting the third element in, sound. I want it to sound good. I have a Sennheiser ME66 and a boompole. SO here are my questions

1)should i plug the mic directly into the camera?
2) If i shouldnt then what should i plug it into (please specify certain brands and models of equipment)?
3)If i record the sound seperatly, do i just import it on the computer then match it with the audio or is it more complicated then that?
4) I hear alot about mixing boards (i think thats what they are called), what are they and how essential are they?

sorry if these questions are very ameteur but well i am one. PLus i am taking this one step at a time and i would like to get all the info so i don tgo wasting money on things i wont need or wont know how to work. Thanks guys
 
Welcome, "shorts"!

As you sound as if you are relatively new to all aspects, I would recommend starting simple with your first short devoted to audio, and building from there.

Others may differ, but I recommend booming with that mic and concentrating on good sound acquisition. Pay attention to things like choosing places to shoot that are quiet, actively working to quiet them down even more, good boom operation (just out of frame, preferably within 12-18 inches, but definitely not more than 3 feet from the mouth). Record straight to cam this time, keeping your levels on the screen showing 2-3 red marks. Consider getting a "pad" for the mic, as it records rather hot.

Record some "room tone" at each recording session, to be used in mixing later. Also try to record any effects you'll need at the time of your shoot.

Doing it this way will allow you to import the audio automatically when you capture the video. No syncing issues in post to fool with for now.

Take some time before acquiring more equipment to use the search function at the top of this page. There are lots of threads addressing your concerns that can be found regarding microphones, mixers, and general noob audio knowledge.

Also get ahold of Jay Rose's book on audio for video production.

Good luck!
 
Get some good isolation headphones to use when monitoring the sound recording. I like my Etymotic ER-6.
 
Well, there are lots of options for you (you may want to scan/read the archives of this forum for lots of discussions on recorders, headphones, booms, shockmounts, blimps, windsocks, cables, mixers, etc.)

I second the recommendation on Jay's book. It is a great reference and tutorial. He generally doesn't recommend specific brands, though.

It is hard to make a recommendation as to how you record, because you haven't given us enough information on what you are doing. For example, are you using a steadi-cam setup? If so, you probably don't want to record directly into the camera.

Generally, recording on a separate recorder is better than going into the camera, but does increase your cost and complexity. And, getting the files into your NLE is different depending on your recorder and your NLE. For example, if you record on DAT, you first have to capture the DAT on your computer, then import it into your NLE. If you record on a CF or hard disk style recorder, you first have to have a way to get the files on your computer. Then you have to determine if they are .WAV or .BWF (as far as I know, all the NLE's can take in .WAV, but some require conversion of .BWF). And, you will want to slate each take to give you a good synch point in the editor, and it is best to do this with a real slate (you could have someone just clap their hands, but this doesn't work as well). It's pretty cool to see in the editor - the sticks are out of focus until the actual clap, that's the frame you align your spike in the audio to.

Anyway, I've stuck a bunch of really random info into this post, but the bottom line is, for simplicity, just record into the camera and get a good pair of headphones to monitor with. Or, hire a mixer/recorder that has equipment and learn from them.

Phil
 
... but the bottom line is, for simplicity, just record into the camera and get a good pair of headphones to monitor with. Or, hire a mixer/recorder that has equipment and learn from them.

My bad. I forgot the headphones (which are essential to hear on set what's going in to the camera/recorder). I also second ptalsky's recommendation on hiring a pro (or if this is a microbudget/zero budget endeavor, finding someone that's into audio, already has some skills and equipment, and is willing to work for cheap). Watching someone that knows how to do it will shorten your learning curve immensely. It will also increase the production value of your video, as you'll be able to put more of your attention into it on the shoot.
 
I can't recommend equipment, other than to say your mic and boom are probably fine. Here are some general ideas to follow, some of which have already been mentioned:

1. Plug directly into camera. Like ptalsky says, recording to DAT is advantageous, but it takes more work on all ends. One huge plus about shooting DV is the fact that the picture and sound are automatically married together. That said, if you're really, really into learning new equipment, rent a DAT, ask the dudes at the rental house for a crash course, and use it.

2. Get a good pair of headphones. Brands used by DJs are usually good. I have a pair of Beyerdynamic DT 770's, but they are expensive and maybe overkill. You need phones that cover the ear and have better-than-average quality. Mostly you will be monitoring using the levels on the camera. Learn to use them, and use them.

3. If you are booming yourself, do some trial and error. Learn how to hold the boom without causing vibration. If someone else is doing it, make sure they know how to boom without causing vibrations and know how to monitor the levels. It's definitely possible to have different people booming and monitoring, but make sure both jobs are handled as jobs unto themselves, not just afterthoughts.

4. Get in as close as possible with the mic without it being in frame. The falloff as the mic moves away from the subject is rapid. It's all about distance, not about looking like a movie crew. Overhead, underneath, or whatever is fine as long as the mic is hidden and close. Did I say keep the mic close? Keep the mic close.

5. As Joe says, you want to record some room tone. It's important to remember to keep the mic where it was during the scene while recording tone for consistency. Later on, you will be cutting out all the audio except the good dialogue and plugging the holes with tone, so you need at least a half minute of clean tone. You record the room ambience just as it was when doing the dialogue, meaning if a machine was running in the background during the scene, keep it running. That means everyone has to shut up and stop shuffling around and just stand there, but room tone is necessary in sound editing. Get everyone used to the phrase "lock it up!" That's A.D. speak for "shut up and stop fidgeting".

6. Consider doing "wild tracks" of your dialogue scenes. That means the actors do the scene just for audio. No dolly moves, no camera work, just clean dialogue like they did in the scene. This is not necessary, but it can save you having to do ADR later. Just keep in mind this option, and you can use your judgment as to whether you need it. I've found that sound guys usually ask for this when the picture is good but the audio is imperfect, especially if there's a particularly difficult camera move involved. It goes without saying that, like when recording room tone, the crew has to shut up while these wild lines are being recorded.

7. Stop for new noise. Airplanes, air conditioners that cut on suddenly, people outside who suddenly start talking, wind gusts that the mic picks up, etc. A take with crappy sound is a bad take, at least as hard to fix in post as bad camera work. Yes, it gets frustrating, because, unlike light, sound can't be blocked out. But the peace of mind is worth it if you're going to be editing your own sound.

8. Screw listening to me. Find a pro sound guy and drill him with questions. As this post proves, people love talking about what they do. Maybe this person will end up helping you out on your shoot.
 
thanks guys. That helped alot. One of my actors actually just graduated with a communications degree with a concentration in sound (would of helped to know that before). So, that should help. One last question, this might sound really dumb but...what is a DAT. is it the thing you see hanging around the waist of the boompole guy? I'm going to record straight onto the camera but just for future reference an answer to this question can help.
 
DAT=Digital Audio Tape recorder. One of a few different ways to record sound separately from your cam. Along with the mixer, hung from the waist of audio guy (or on big shoots, mounted on sound cart).

Would not recommend getting one (even off e-bay), as they have been superceded by hard disk and flash memory recorders. DAT's are great, and will continue to be used for a few more years, but their days are numbered. Would put your money (when you're ready) into newer technology.
 
Back
Top