MattinSTL
Sound Modulator
A boom pole is one of those things... like tires. It's something you never really want to buy but you're a lot happier once you do. I never really got excited about getting a boom pole even though I always WANTED one.
For the last year now I've used a 2 piece aluminum telescoping pole that I got from Home Depot for around $16. It would extend from four to eight feet. I drilled a hole vertically through the plastic plug at the top and threaded a 3/8" stud through that so that I could mount my shock mount and mic. This system actually works, but it just isn't a good solution... i.e. handling noise, portability, setup time... etc.
So anyway, I decided that now was the time to just commit my next DV expense to finally getting that boom I always wanted. But which one to get? What makes one pole better then another?
From every person that I spoke with at each of the best professional sound outlets across the country... the MAIN reason to go with a carbon fiber or graphite pole is for the weight. With a decent pair of hands, gloves, and the ability to just hold still... an aluminum pole should yield just as good of results as a lighter pole.
Having to compromise on price meant my choices would be limited to booms under $400. At this point I had to decide whether or not to even include CF or Graphite as an option. Then I had to choose what length to get... and should it be internal cabled or not?
I really wanted a pole that was around 12-13 feet. By most advice if you can only get ONE pole this is the size to get. Professional boom ops normally have at least 2 lengths however... a short pole and a 16-footer (or more). Bearing this in mind I decided to go with a shorter boom and plan for a seperate boom purchase perhaps next year. I figured if I could save a couple bucks in the process then why not?
The other thing I decided was that the new pole MUST have internal cabling. My 2-stage jobbie that I've been using means constant cable management. XLR cables MUST be coiled to avoid becoming a complete mess. With an uncabled boom you have to wrap the XLR around the pole a couple times and re-adjust the XLR every time you change the length of the pole... It gets pretty annoying when you're trying to "run 'n gun" some shots. So CC cabling was a luxury I was looking forward to.
So there you have it... now rather then give you ALL the contenders I've considered, I'll keep it simple and just give you the short list:
LIGHTWAVE GT-10C Click HERE
$245... CC cabled... min length is 30"... max length is 116"... 29.92 ounces without the cable.
K-Tek AVALON Click HERE
$229... Check www.coffeysound.com, www.trewaudio.com, or www.equipmentemporium.com. CC cabled... min length is 30"... max length is 110"... 23.5 ounces without the cable.
And finally the K-Tek AVALON in graphite... which is $399 but it's even a half pound lighter then the K-Tek AVALON in aluminum. This pole was pushing my budget to the very last dollar and it's really more then I wanted to spend, but I figured over the long term an extra $170 isn't going to change my life. So I ended up with this pole.
I owe a BIG THANKS to DAVE FISK of Coffey Sound for turning me on to the new K-Tek poles!
The thing I learned in this though is that there really isn't an excuse for anybody to be using a painter's pole if you're shooting with a DVX. The internal cabled K-Tek AVALON in aluminum is a TOTAL BARGAIN!!! I was told that the ONLY difference in the aluminum and graphite AVALONS is just that, the tubes. The locking collars are a dream... as is the whole feel of the thing. It oozes quality. I honestly think that the aluminum AVALONS are probably the best boom pole value going right now... by a LONG shot. There is as much of a weight difference in the K-Tek and Lightwave as there is in the K-Tek and the other carbon fiber or graphite poles... and the Lightwave COSTS MORE.
So there you have it lads. If you've been wanting a boom pole for a while, but you've held off because that old painter's pole has gotten the job done, NOW may be the time to finally make your job easier AND more fun! An internally cabled boom pole is a DREAM to use and K-Tek has simultaneously raised the bar for quality AND lowered the price of entry-level boom poles.
For the last year now I've used a 2 piece aluminum telescoping pole that I got from Home Depot for around $16. It would extend from four to eight feet. I drilled a hole vertically through the plastic plug at the top and threaded a 3/8" stud through that so that I could mount my shock mount and mic. This system actually works, but it just isn't a good solution... i.e. handling noise, portability, setup time... etc.
So anyway, I decided that now was the time to just commit my next DV expense to finally getting that boom I always wanted. But which one to get? What makes one pole better then another?
From every person that I spoke with at each of the best professional sound outlets across the country... the MAIN reason to go with a carbon fiber or graphite pole is for the weight. With a decent pair of hands, gloves, and the ability to just hold still... an aluminum pole should yield just as good of results as a lighter pole.
Having to compromise on price meant my choices would be limited to booms under $400. At this point I had to decide whether or not to even include CF or Graphite as an option. Then I had to choose what length to get... and should it be internal cabled or not?
I really wanted a pole that was around 12-13 feet. By most advice if you can only get ONE pole this is the size to get. Professional boom ops normally have at least 2 lengths however... a short pole and a 16-footer (or more). Bearing this in mind I decided to go with a shorter boom and plan for a seperate boom purchase perhaps next year. I figured if I could save a couple bucks in the process then why not?
The other thing I decided was that the new pole MUST have internal cabling. My 2-stage jobbie that I've been using means constant cable management. XLR cables MUST be coiled to avoid becoming a complete mess. With an uncabled boom you have to wrap the XLR around the pole a couple times and re-adjust the XLR every time you change the length of the pole... It gets pretty annoying when you're trying to "run 'n gun" some shots. So CC cabling was a luxury I was looking forward to.
So there you have it... now rather then give you ALL the contenders I've considered, I'll keep it simple and just give you the short list:
LIGHTWAVE GT-10C Click HERE
$245... CC cabled... min length is 30"... max length is 116"... 29.92 ounces without the cable.
K-Tek AVALON Click HERE
$229... Check www.coffeysound.com, www.trewaudio.com, or www.equipmentemporium.com. CC cabled... min length is 30"... max length is 110"... 23.5 ounces without the cable.
And finally the K-Tek AVALON in graphite... which is $399 but it's even a half pound lighter then the K-Tek AVALON in aluminum. This pole was pushing my budget to the very last dollar and it's really more then I wanted to spend, but I figured over the long term an extra $170 isn't going to change my life. So I ended up with this pole.
I owe a BIG THANKS to DAVE FISK of Coffey Sound for turning me on to the new K-Tek poles!
The thing I learned in this though is that there really isn't an excuse for anybody to be using a painter's pole if you're shooting with a DVX. The internal cabled K-Tek AVALON in aluminum is a TOTAL BARGAIN!!! I was told that the ONLY difference in the aluminum and graphite AVALONS is just that, the tubes. The locking collars are a dream... as is the whole feel of the thing. It oozes quality. I honestly think that the aluminum AVALONS are probably the best boom pole value going right now... by a LONG shot. There is as much of a weight difference in the K-Tek and Lightwave as there is in the K-Tek and the other carbon fiber or graphite poles... and the Lightwave COSTS MORE.
So there you have it lads. If you've been wanting a boom pole for a while, but you've held off because that old painter's pole has gotten the job done, NOW may be the time to finally make your job easier AND more fun! An internally cabled boom pole is a DREAM to use and K-Tek has simultaneously raised the bar for quality AND lowered the price of entry-level boom poles.