I'm a bit confused on what I need for a boom mic system.

MattC said:
Virum,

Well now you are, in a way, getting in to post issues (sound design). Really the audio interface you referenced (or one like it) would be a great way to go, but then you need an audio app to handle the recording. Now if you had the budget this is definitely the way to do it, as you then import your video into the audio app and do all your sound design and mixing in there. But I don't think you have that kind of budget. And if you're going to spend that much a stand alone recorder might serve you better.... I'll have to think about this.

I do have a few friends with audio applications. I also won Adobe Audition in a raffle, is that good enough for what I want to do?
 
Well, if you have a friend with an audio app, they should have an audio interface (like the one you linked to), no? If they do, then that's what you'd use. Run the Oktava into that, record your foley or SFX direct to disk, and then mix in their app or Audition (I think, to be honest, I've never used Audition, so I have no idea as to its capabilities).
 
MattC said:
Well, if you have a friend with an audio app, they should have an audio interface (like the one you linked to), no? If they do, then that's what you'd use. Run the Oktava into that, record your foley or SFX direct to disk, and then mix in their app or Audition (I think, to be honest, I've never used Audition, so I have no idea as to its capabilities).

Well, I would but he's not local. He'd let me borrow the software for a month I'm sure, but I couldn't actually go visit him to do the sound recording.

What software would you recommend? PC preferred; we only have an iBook g3 in the way of Apples.
 
I use Premiere, and has some decent sound capabilities.

If you plan on using the mic to record directly to your PC, you can try to get an xlr to pin jack adapter and run it into your sound card. Most PC's come bundled with some simple sound software. Look in you accesssories to see if you can find something. The one I used to use (it came with my Dell, but I don't remember the name) could record right to the hard drive from the sound card.

Edit: Start/Programs/Accessories/Entertainment/Sound recorder. Try that to capture through your sound card.
 
That's a good question. I don't really know. Going from another source down to a pin is the only way I've ever recorded to my hard drive. But I've never noticed a loss of quality. I've recorded instruments and vocals. It's always sounded great. Maybe somebody else here can give you a technical answer. But for the price of an adapter (about 15 bucks at Radio Shack) it might be worth trying to see what you think. It's never been a problem for me.
 
Virum said:
Will the xlr to pin adapter result in loss of quality?

Not so much, but recording with a cheap soundcard (such as what is already in your computer, or even a more "expensive" Audigy) will result in a substantial loss of quality. If you are not used to hearing a quality computer recording set up, you might think it sounds great, but trust me it doesn't.

Now, of course the question for you is going to be, does it sound good enough for what you can afford at this time, and the answer may very well be yes, and you do what you have to do, but they are two different answers.

I could recomend a lot of sound software for the computer, but they'll screw up your budget. In any case check out Cubase or Sonar. I think they might each have a "lite" version that can get into relatively inexpensively, but then you also need the audio interface. You could also look at an M-Box unit that would give you both.

Really, I think an important strategy for you is going to be to line up your shoot and as much of your foley as you can at the same time. If your shooting a kitchen scene where the protagonist opens and closes a refrigerator, after you shoot the scene out, then use the camera to record the foley right there on the spot. The more of this you can do, the better. Also, remember you can buy almost any sound effect you might need for a few dollars online, so if you don't "get it" in production, it's not entirely lost. In fact, if you would be spending a lot of money on recording gear/software just to do foley on this project, you will probably find it more economical to just by the backgrounds and SFX that you need.
 
Good advice Matt. :)

Besides; I'm sure I could borrow the camera again if I missed some sounds, so it's not too big of a hassle (considering I've already calculated that the movie will need at least 45 straight days of post production on the video alone (not counting editing. :P)).

Thank you guys!

Oh, one other thing. I need to get a windscreen for the Oktava (or so I've heard); are the ones at Radio Shack good enough?
 
Quick note: Don't forget the oktava takes phantom power, so attaching it to the mini-jack of you computer will not work unless you buy a phantom power supply. At that point you might as well invest in one of those cheap USB/SPDIF mixers.

Also the A/D on most computers is quite crappy.

Best o luck.
 
Not having recorded without a good audio interface, I didn't even think of the phantom power issue... I suppose if you really had to you could use the at897 because you can power that with a battery, but again it would be less than ideal.

Personally, I think everyone involved in digital movie making should own a quality audio interface and a good audio app, but again, that might not be feasible right now. IMO, USB interfaces suck. They just don't have enough throughput for my taste, the lowest I'd go is firewire.

But again your talking money. You might want to see if you can find a used DAT unit. With more and more folks going to HD recorders, you might find a good deal on a DAT unit that would fit your needs quite well.

Matt
 
You might even consider something like this:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=41480&item=7308819643&rd=1

It's a desktop model and will be cumbersome, but it would see you through and it's a quality unit if you can get it for a lowball price. But you need to really know your options because once the price on this reaches a certain point, it no longer makes any sense. But again, I don't believe this unit has phantom power, so again your SOL without a phantom power source or using the at897...

Matt
 
Matt,

I'll be buying a new PC in the next few months. What's a good interface to look at. I don't have a ton of money, but I'd be willing to shell out 300-500 bucks. (Although, as always, less would be better.) I use Allegro and Cubasis currently for software. Just a point in the right direction would be great.

BTW, the phantom power issue didn't occur to me either since I run everything through my 4 track first.
 
For PC I would look at the M-Audio products or the Echo products. I'm on a Mac and use MOTU stuff, but I know a lot of guys on PCs who have the M-Audio FW-410 and love it. Very good performance in the price range you are considering.
 
Thanks. I see that's a firewire interface. Is there one to hardwire right to the PC? Is there an advantage to that over firewire?
 
Yes you can get PCI based interfaces. They are better, especially if you are doing multitrack recording, but for what you guys are doing a decent firewire interface will be fine. Plus this device (or one like it from another manufacturer, like the Echo Layla) is portable. Douglas Spotted Eagle recorded the Mormon Tabernacle Choir for the Olympic games (they Milli Vanilli'd it) with just such a set-up and achieved fantastic results. Everything he needed for the gig fit in a backpack...
 
Wow that's impressive. Although multitrack recording is on my agenda. Maybe I'll look into the PCI interfaces. Thanks.
 
Thanks Matt for all the info on what I need. I think I'll be ok without having to buy anything (for now at least). When I'm ready, I'll re-read this thread. :)
 
Back
Top