I'm a bit confused on what I need for a boom mic system.

Virum said:
I don't have enough to hire anyone, let alone you. =)

Cheers. :)
keep the food good , much important then the mikes since even cheep friends starting run out with empty stomack


ill make mistake in my memuars writing your name with mistake: Nitsche.:laugh:
 
Oleg,

I'm not trying to be a jerk, honestly. And if someone was really making a "MOVIE" like they wanted to get distribution and such, I would not recommend they buy anything, I would recommend that they hire someone like you, who comes with their own gear and can produce professional results.

But this is a kid, trying to make a movie, mostly so he can learn and get better at it. I'm not saying that you should lie to him, and I don't think I did either. I'm just trying to be encouraging to a young person starting out and trying to learn. We were all there once, no?

Matt
 
he never mentent his adge , and i am also a kid in some way if i check the people who work around :-)
if i am not mistake buy the zitat from the bible ( i am translating from hebrew, so actually english vertion might be different )
the one who save the stick from his sun - hate his sun

something like if you dont educate them in hard way - you dont educate them at all
so - I like almost everyone on this board ,incl nitsche:-)
 
Ok, I bought the Oktava MK012 microphone with cardioid, hyper-cardioid and omni capsules. :) More than I need, but I got them for a pretty good price.

May not be "top of the line" equipment, but I'm not filming on a top of the line camera either. ;)

I'm also part of a local young filmmakers group (we share resources, that's how I have access to a DVX-100a), so they won't go to waste, I'm sure. :)
 
Virum said:
Oh, I'm not a "no money" film maker; I'm putting in quite a bit of moola, around 2K dollars. I just want my money to go as far as it can, you know? :)

Edit, for me, a teenager, that's quite a bit. Not much by many standards, but if Rodriquez could do El Mariachi with 7K, I think I can make my movie for 2K. :)

Quick notes on El Mariachi: First he did shoot it in Mexico (very weak dollar there)with no location sound and no post budget. The $7000 was basically for film stock and processing (even the camera was borrowed). The whole thing was looped, the only production audio was him with a cassette tape recorder having actor repeat what minimal dialog there was after each take. After the movie was ADR for distribution the true budget of several hundred thousand dollars is revealed. The people who watched his film at all the film festivals and gave him all the awards were watching the version that had the $100,000+ budget.

The movie was accepted as totally looped as it was a foreign language film (here in the US) and it was an action flick with very little dialog. This is not to say you can't totally ADR a film (Titanic is over 80% ADR) it is just very expensive and time consuming, plus it takes some real talent to make it seem even semi-natural.

Lastly, adjusted for today's dollars, the film cost more like 10k to shoot.

2k is a no-money film but if you are just starting out, do what you can. It's a great way to teach yourself. The message is more that you shouldn't have any huge Rodriquez aspiration your first time out on a no budget film. If you aspirations are reasonable then you will stick with it and keep making films, each time learning from the last and making it better.

Best of luck, and definately at least read Jay Rose's Producing Great Sound for Digital Video book (http://www.dplay.com/book/pgs2e/index.html). It's a great primer to get you started.
 
Virum,
Good luck with your movie. My quick bit of advice is to spend a day and go through this entire audio forum, now that you bought the oktava, you're going to find out it's a great a mic, but not unless you get a nice ($120) shockmount and a good windscreen (even for indoors). There are at least 100 threads about the oktava mic on this audio board and it would probably be wise to sift through them. READ READ READ. Look for some of the posts by Matt in STL, he's done an extensive amount of research on mics and has contributed greatly to this forum. He will also tell you that the oktava is a great mic ..... but ONLY if it has the proper shockmount and bbg/windjammer combo.

Good luck with the flick.

:thumbsup: CAVEMAN
 
Thank you, wabbit. :)

Caveman said:
Virum,
Good luck with your movie. My quick bit of advice is to spend a day and go through this entire audio forum, now that you bought the oktava, you're going to find out it's a great a mic, but not unless you get a nice ($120) shockmount and a good windscreen (even for indoors). There are at least 100 threads about the oktava mic on this audio board and it would probably be wise to sift through them. READ READ READ. Look for some of the posts by Matt in STL, he's done an extensive amount of research on mics and has contributed greatly to this forum. He will also tell you that the oktava is a great mic ..... but ONLY if it has the proper shockmount and softie/windjammer combo.

Good luck with the flick.

:thumbsup: CAVEMAN

Ok, I will do that. :)

Is this the kind of shock mount I want? Or is it not good enough? Could you link me to the appropriate kind?

Also, what's your recommended windscreen?

STL?

Thanks for the good wishes as well. :)
 
The mixer was kind of dropped off the discussion. The boom operator needs a way to hear what he's getting. The standard way is to feed the mic into a mixer where the boom op/soundman can monitor what they are getting and then send the feed to camera. Most field mixers also have a return feed capability so the soundman can listen to what is actually getting to the camera. The DVX pots are virtually impossible to adjust on the fly while shooting. They weren't made for that.

It's too late, but I would have suggested you consider the K6 with the ME 64 hyper capsuel and then you could add the 66 or 67 for exterior. The Octava won't be as good outdoors as the ME66 in most situations.
 
He's not going to be using the the Oktava outdoors, he'll be using the AT897 outdoors (which I like better than the me66).

Yes some type of mixer would be beneficial. If that's not in the budget, you could run your boom man's headphone into the DVX (I believe, personally I own a different camera - but this would definitely work with the XL2).
 
He's not going to be using the the Oktava outdoors, he'll be using the AT897 outdoors

That's correct; I'm probably going to order it through amazon when I buy the books you recommended; I'll save on shipping.

I'm looking into mixers, thinking about getting a used Yamaha MG10/2 since it has XLR ports and the guitar ones. We're making our own soundtrack as well; I think this would do everything I want it to. And it has good reviews to boot.

Thoughts?
 
IF you are trying to keep things simple, and only using one mike at a time, stay away from a mixer (unless you have an experienced soundguy) the DVX captures audio very well.

As far as a boompole (I don't think that was answered yet) look for a good painter's pole. I found one at Lowe's for 15 bucks. It's light aluminum and goes from 6'-12'. The key is to make sure that the joint locks tight and doesn't rattle. It won't be as light or last as long as a real boom pole, but it's a lot cheaper. I'm a musician so I have lots of mic stands laying around. I took out the plastic threaded thingie on the painters pole and put in the sawed off end of a mic boom so I could attach my shock mount. I tape the hell out of the cable and I'm good to go.
 
IF you are trying to keep things simple, and only using one mike at a time, stay away from a mixer (unless you have an experienced soundguy) the DVX captures audio very well.

What about post production sound recording? I need to record my sound into the computer; I think I need a mixer for that because I'm borrowing the DVX; I won't have it past my shoot.
 
Well, depending on what software/soundcard you have available you can record that straight into your computer. You will be recording each sound as a separate mono audio file and will layer and "mix" your audio in the software application. If you had to, you could record your audio to a minidisk player or an iriver. But recording straight to pc/mac would be best.

I agree, the mixer is going to cause you more hassle than anything else. You're not at a point where it will be of value to you. BTW, Do you have any friends in bands, that do their own music recording?

Matt
 
MattC said:
Well, depending on what software/soundcard you have available you can record that straight into your computer. You will be recording each sound as a separate mono audio file and will layer and "mix" your audio in the software application. If you had to, you could record your audio to a minidisk player or an iriver. But recording straight to pc/mac would be best.

What kind of special hardware would I'd need?

I agree, the mixer is going to cause you more hassle than anything else. You're not at a point where it will be of value to you. BTW, Do you have any friends in bands, that do their own music recording?

No, me and my friends play, but we've never done any recording. We were going to do some for the movie though.
 
You can use any miniDV deck or camera to capture your video and audio to your computer via firewire.. AFter you capture it, you can play with the audio to your heart's content.
 
Ok; that's great.

However, I don't own the DVX100a, I'm borrowing it, so how would I plug my XLR cables (or whatever ones they'll be) into my computer to capture audio if I needed more after filming?
 
So you are talking about adding additional audio after you have all your footage? If you are, this is what I do.

One option is I use my home video camera (canon zr-20) to record audio with whatever mic is appropriate. Then I capture via firewire.

The other thing I do is, if I need to capture analog for some reason, I run the signal through an old four trak, which I run directly into my sound card audio in. If you record the sounds on a casette, you can do the same thing with a household unit. Just run the signal out through the rca jacks and get an adapter to go down to a single 1/8 stereo pin jack. It should plug right into your sound card.
 
Well, sort of. I was hoping there was just something to plug into my computer (like an XLR to stereo input adapter) or something along the lines of this , but hopefully something cheaper.

See, the movie is going has quite a few action scenes, so I'm going to go out and get some actual sound recordings of some guns to stick in for post. I was thinking I could just take my laptop, attach the XLR input to it, plug in the mic, and then I'd be all set to record.

If I owned the camera, I'd just record the sound onto it that way, but I dont'

Am I making sense? :undecided
 
Yes, you are making sense. But how do you plan on recording the audio? That's a factor in figuring out how to get it on your computer.
 
Virum,

Well now you are, in a way, getting in to post issues (sound design). Really the audio interface you referenced (or one like it) would be a great way to go, but then you need an audio app to handle the recording. Now if you had the budget this is definitely the way to do it, as you then import your video into the audio app and do all your sound design and mixing in there. But I don't think you have that kind of budget. And if you're going to spend that much a stand alone recorder might serve you better.... I'll have to think about this.
 
Back
Top