How did they light this?

arturochu

Active member
Hi there i'm looking for suggestions on how to light something like this:

Screenshot 2015-03-23 18.20.12.jpg

But making my background completely black.

Thanks in advance.

Cheers
 
Suspend a large diffusion above the subject, flag it from the background with a skirt or large "egg crate", separate the subject from the background as much as possible? You could also add a little light from the sides as well, if you like the look, as long as it doesn't fall much on the background. The more light you have at close range on your subject, the further you can stop down or ND to push the background to black. Also, using a background that is actually black will help to stop it reflecting light.
 
i was thinking of using 1 space light located right on top of my subject and just outside of frame, do you think that would work?
 
This was lit by a VERY large source. Probably about 1k at least through a huge diffusion sheet - at least 4x8 feet would be my guess. Nearly directly Over head based on the little bit of shadow and shading on the subject - a little towards to camera maybe.
if you used a black background you probably would not get the sphere of light on the ground which is adding a lot of space to the shot.
 
I'd try with a 6x4 feet softbox hanging just out of the frame, with a skirt around to create the nice circle of light on the floor

And yes, these threads are a lot more useful than the ones speculating about announcements of possible XYZ cameras
 
background completely black? just light the subject as most have stated with an overhead source and general lighting. a huge green screen set does the job 100%. this is rather very easy to do. the black is just an effects or anything in the bg
 
Making the background completely black may be more easily accomplished by making the overhead light quite bright and closing your iris to bring the lit area down. The background will naturally fall out of the dynamic range of the camera and clip to black.

Of course, the more dynamic range your camera has, the brighter the overhead will have to be.
 
What David said plus space will be a big factor - the further you can get them away from the back wall the better. Due to the fall off and shape, this looks like a skirted overhead balloon.

There's in fact two sources in this image - the overhead and the white box he's on is reflecting a great deal of luminance back, which Im sure was deliberate for their final image. TO assist the black wall, I would also have the reverse side of the box painted matte black as well.
 
got it, thx for your feedback, i think i'll go with a 10,000 fresnel lighting from the top, with a babenet that makes a little difussion maybe some 120cm kinos as a fill, this is happening next tuesday, i'll be using the fs700 in 240fps, i'll post some bts pictures as well as the final video.

cheers.
 
I can assure you that a 10k through bobinette is not how they did that and won't give you the same look. Maybe through full grid, I still wouldn't use a 10k if you need something to aim directly down though. Lighting like this usually employs some sort of rig involving multiple fixtures so you have the flexibility of turning bulbs on or off to change the output. To me it looks like they either used a balloon (unlikely since they're on a stage) re constructed a large space light and extended the skirt a bit, or made a teaser surrounding it.
 
And yes, these threads are a lot more useful than the ones speculating about announcements of possible XYZ cameras

Now hold on, can this XYZ camera you speak of shoot 120fps/4K? And how about dynamic range, what are we talking?
 
So if you look at the ground, there's two separate points of fall-off. One a little ways out as it leaves the platform, becoming significantly less spotty and fading out, and two when it pretty much hits a line and goes to black. The second could actually be due to some post work, and I bet it's had some post work done anyway, but I what's more likely is one big source punched through some diffusion, some kind of silk likely, but not far enough from the source to quite fill the frame... causing the spottiness, and then the second bit of fall-off which is likely cut by a skirt of some kind. This is also helping to keep it off the back wall, but we can clearly see some banding and stuff back there and it's a bit more gray than black, so it's not gone to complete black. If you wanted it total black, you could just crush it down but you'd have to spend a lot of time NOT crushing down your subject's darks, as well. The better option would be to just get more space between the subject and back wall.

I find it likely that this particular shot used one big light, though the same general effect could be reached with a grid of lights spread evenly above your diffuser.

Basically, the take-away to get this effect is that you need a giant soft source above your subject and something to cut the light to keep spill down and get nice dark edges.

One other thing, what's interesting is that banding we see, the brighter area is near the top of the frame. This would lead me to believe what's actually going on is spill or reflection from the main light against the ceiling, bouncing back onto that wall back there.

By the way, if you post the actual video this is from we might find some more hints as to how exactly this specific thing was lit.
 
PHP:
Looks good. I think you hit the mark. Clearly you used a harder light, but that's more the look I thought you were after anyway from your original posts.
 
Black drapes - simple answer. The thing to remember that even black fabric can be seen if it has a small amount of dust on it. We can project onto black cloth and it can be seen dimly.

The distance thing is very important. Double the distance to the background and the brightness drops to a quarter of what is was. Flags, barn doors and black wrap can all stop (or help stop) light landing where you don't want it.
 
Back
Top