HD-P2 and Sony HDR-FX1 success stories?

fakeshapes

New member
Great resource, already, thanks for the forum.

As I'm always on the lookout to improve a double-system sound setup, I
found the HD-P2 to be a great bang for the buck in terms of timecode.
But before I commit to using it in the field, I was wondering if there
was anyone who has taken it onto a narrative film set shooting on an
FX1.

I know the Z1s would be easier, with both free run time code and record
run timecode, as well as XLRs to plug into the sync of the HD-P2, but
we're working with an FX1 this go round.

In the end, we may just go to the standard head and tail slate, but it
would be great to take advantage of the ability to just drop the media
into FCP5 with, if not the media synced, at least the meta data match
to the frame automatically! So if anyone has any practical advise on
the best way to get the FX1 and HD-P2 to play together to their best
potential, I'd appreciate it!

:costumed-smiley-047
 
fx-1 does it have free run tc ?
if yes its very symple usiang the tc slate as generator to jam the tascam

or pull out the lanc and convert it to ltc ( ambient make this kind of box - cost as your tascam)

, if not you make it film way , clup each take .
by the way z-1 is the same - you cant take ltc direct out

the tascam is quit big lemitation for normal tc work - esspesially with dv **** cameras (the fx ,z-1 dvx and all the others which made for budget )
 
Thanks so far, Exile -

No, for the record, the FX-1 has only Record-Run Timecode.

But there's been discussions on a workaround out of the LANC - converting or generating LTC or even MIDI timecode. So I think we're on a path, here, and we can't lose sight of the goal, which is the ability to generate some kind of data that can make syncing in post exponentally easier.

So far, each with their own tradeoffs, the options are rolling in as:

1) Old reliable slate clap, align picture to waveforms in your NLE
2) Use a timecode slate and jam the signal of the Tascam, align .wav file data to picture in NLE
3) From LANC, to LTC convertor (such as CLOCKIT SYNC MODULE ACS 401), jam LTC to Tascam. But does the HD-P2 timestamp the .wav files with LTC? Then when in FCP5, then what?
4) From LANC, to MTC converter (such as Roland SI-80S), convert time pulse to MIDI time code... then would the HD-P2 even read it?
 
the cheapest way is to buy horrita generator ( the eng type), synchronize the tascam disconnect and send the output to one of the audio camera tracks ( place the tc generator on the camera ).
and then on nle replace the tc which came from the dv cassette (peas of cake on avid)
no problem with bwf it stamped whith tc on tascam .

if it fcp - you will need gallery software for that conversion
then you convert the bwf in sebsky tools to quick time and synchronize everything automatically
the horrita is about 400$ or so
you will not need digi clap , the regullar stick would be ok
check the drift between the horrita and tascam if it good for 2 hours, just sync the tascam from time to time ( it loose tc if it shot down )

of course you can go directly from camera lanc , but then the camera will have to run first so you will have proper tc on the tascam stamp ( i see allot of headache)
 
Back
Top