clean a audio track made with the microphone of the camera

[migu3lp]

Just made a big mistake and all the sound of a big interview was recorded with the microphone of the camera.

Anybody know the best way to resolve the problem, the best software/plug-in?

Tanks

Miguel

 

[BRH]

It's easy, you push a button and the noise goes away.

 

[migu3lp]

Hi BRH, I just recorded the sound with the microphone of the camera and I would like to know the best way to make sound like recorded with a external mic.
My english is not so god and I don't understand your answer, tanks.

 

[Rick R]

Hi BRH, I just recorded the sound with the microphone of the camera and I would like to know the best way to make sound like recorded with a external mic.
My english is not so god and I don't understand your answer, tanks.

Translate to any language: Cannot be done.

 

[capitanfracassa]

This is not easy. How long it is? Send me 20 seconds and I'll tell you what I believe is possible.

 

[Ryan-Guy]

It is going to sound like it was not mic'd close pretty much whatever you do, but you can clean up the noise a little. Get a noise reduction program, and do small passes with it until the interviewer's voice starts to sound weird, then go back one pass. The noise will not be gone but it should be better than what you originally had.

 

[Noiz2]

Hi BRH, I just recorded the sound with the microphone of the camera and I would like to know the best way to make sound like recorded with a external mic.
My english is not so god and I don't understand your answer, tanks.

He was being flip. You are not going to make that happen. Yu can make it better but it's never going to sound like it was boomed. How much better depends a lot on how bad it is and how much money you are willing to throw at it.

 

[Rippie]

Anybody know the best way to resolve the problem...?

Subtitles!

 

[migu3lp]

Tank you all, I just had a nice proposal from a sound guy, design the sou in protools frame by frame.

 

[gpforet]

frame by frame?

Tank you all, I just had a nice proposal from a sound guy, design the sou in protools frame by frame.

 

[migu3lp]

This was the proposal, it's not the first time he does this.

 

[Noiz2]

I'm going to go out on a limb and guess that english is not the OP's first language and that "frame by frame" suffered in translation.

So migu3lp
that is good. I think edit is probably a more accurate description since I'm assuming this is a doc of some sort (the "interview"). You certainly want someone who has done it before. If he's good and lucky he can get your track sounding a lot better.

good luck