Nick Mirro
New member
Hi. My first post here. Nice looking site 
I'm new to professional sound (though not making any) and trying to put something together on a tiny budget. I'm hoping 2 affordable mics can be coaxed work with a mixer for field use. Will this inexpensive mixer work with the 2 mics below?
ROLLS MX124 PORTABLE 4 CHANNEL STEREO MIXER
Input Connections 4 - 3-pin XLR female
Output Connectors 2 - 3-pin XLR male
Max Input/Output Gain +55dB
Input Impedance: 600 Ohms
Output Impedance: XLR 500 Ohms
Signal-to-Noise Ratio 84dB
Phantom Power +18V DC
AC Power Requirements x2 9-Volt Alkaline Batteries
Current Draw: 30mA
Dimensions 6.3 x 2.3 x 3.7" (160 x 58.41 x 93.98mm) (WxHxD)
Weight 1.5 lbs (680.38 g)
AUDIO TECHNICA AT875
Transducer Fixed-charge back plate, permanently polarized condenser
Polar Pattern Line + gradient
Frequency Response 90Hz - 20,000Hz
Dynamic Range (Typical) 107 dB, 1 kHz at Max SPL
Sensitivity -30 dB (31.6 mV) re 1V at 1 Pa
Impedance 100 ohms
Signal-to-Noise Ratio RATIO 74 dB, 1 kHz at 1 Pa
Maximum Input Sound Level 127 dB SPL, 1 kHz at 1% T.H.D.
Power Requirements 11-52V DC, 2 mA typical
Output Impedance 100 ohms
Output Connectors Integral 3-pin XLRM-type
Phantom Power 11-52VDC, 2 mA typical
Dimensions 6.89" (175.0mm) Long
0.83" (21.0mm) Diameter
Weight 2.8 oz (80 g)
AND THE PROBLEM CHILD - Olympus ME51S Olympus ME-51S Stereo Microphone 145037 B&H Photo Video - already own this one.
(using a Y-adapter)
Type Stereo Electret Condenser Microphone
Frequency Response 100Hz - 15kHz
Directivity Uni-directional x 2
Sensitivity -40dB @ 1kHz
Impedance 2.2 kOhms
Plug 3.5mm Stereo
Power Supply Plug-in-power System (1.5V - 10V)
Dimensions (L x B x H)
1.5 x 0.55 x 1.6" (38 x 14 x 40mm)
Weight 0.24 oz (7 g), 0.6 oz (18 g) with cable and clip
Can these mic be coaxed to work with this mixer?
I'm new to professional sound (though not making any) and trying to put something together on a tiny budget. I'm hoping 2 affordable mics can be coaxed work with a mixer for field use. Will this inexpensive mixer work with the 2 mics below?
ROLLS MX124 PORTABLE 4 CHANNEL STEREO MIXER
Input Connections 4 - 3-pin XLR female
Output Connectors 2 - 3-pin XLR male
Max Input/Output Gain +55dB
Input Impedance: 600 Ohms
Output Impedance: XLR 500 Ohms
Signal-to-Noise Ratio 84dB
Phantom Power +18V DC
AC Power Requirements x2 9-Volt Alkaline Batteries
Current Draw: 30mA
Dimensions 6.3 x 2.3 x 3.7" (160 x 58.41 x 93.98mm) (WxHxD)
Weight 1.5 lbs (680.38 g)
AUDIO TECHNICA AT875
Transducer Fixed-charge back plate, permanently polarized condenser
Polar Pattern Line + gradient
Frequency Response 90Hz - 20,000Hz
Dynamic Range (Typical) 107 dB, 1 kHz at Max SPL
Sensitivity -30 dB (31.6 mV) re 1V at 1 Pa
Impedance 100 ohms
Signal-to-Noise Ratio RATIO 74 dB, 1 kHz at 1 Pa
Maximum Input Sound Level 127 dB SPL, 1 kHz at 1% T.H.D.
Power Requirements 11-52V DC, 2 mA typical
Output Impedance 100 ohms
Output Connectors Integral 3-pin XLRM-type
Phantom Power 11-52VDC, 2 mA typical
Dimensions 6.89" (175.0mm) Long
0.83" (21.0mm) Diameter
Weight 2.8 oz (80 g)
AND THE PROBLEM CHILD - Olympus ME51S Olympus ME-51S Stereo Microphone 145037 B&H Photo Video - already own this one.
(using a Y-adapter)
Type Stereo Electret Condenser Microphone
Frequency Response 100Hz - 15kHz
Directivity Uni-directional x 2
Sensitivity -40dB @ 1kHz
Impedance 2.2 kOhms
Plug 3.5mm Stereo
Power Supply Plug-in-power System (1.5V - 10V)
Dimensions (L x B x H)
1.5 x 0.55 x 1.6" (38 x 14 x 40mm)
Weight 0.24 oz (7 g), 0.6 oz (18 g) with cable and clip
Can these mic be coaxed to work with this mixer?