"Camera Carts"

Sometimes i pack up into a sedan, and i have to stack some heavy pelicans in the back seat. Or i run out of space in the trunk and have to throw the cart in the back seat.

I started looking at those back seat pet covers to protect the back seat. Wondering if any of you load gear into a sedan and what your solution my be?

Pelis on the back seat scares me. If you flip or come to a hard stop the pelis will do very bad things to you. Pet cover sounds good, strapping them down securely sounds better.
 
Pelis on the back seat scares me. If you flip or come to a hard stop the pelis will do very bad things to you. Pet cover sounds good, strapping them down securely sounds better.

Thank you for saying that. Yeah, i’ll avoid loose gear in the cabin.
 
Once you go Mag-Liner you never go back. Not the most compact when folded up. But I drive a Chevy Suburban as is apparently required of all tv cameramen / women.

mag-c_jr.jpg
 
I just ordered a rubbermaid camera cart. Will report back.
That is VERY similar to some I looked at and almost bought. Looks useful. I was wishing you could get them with no-flat tires like the RNR to save weight but I couldn't find any. Thought about swapping them myself. Anyway, I ended up buying a RNR on sale so I didn't get the Rubbermaid one but may in the future if need arises.
Please give us feedback after you use it
 
That is VERY similar to some I looked at and almost bought. Looks useful. I was wishing you could get them with no-flat tires like the RNR to save weight but I couldn't find any. Thought about swapping them myself. Anyway, I ended up buying a RNR on sale so I didn't get the Rubbermaid one but may in the future if need arises.
Please give us feedback after you use it

I'm pretty sure you can swap out for these "Flatbusters" - https://www.filmtools.com/filmtools-117-609.html

I have no-flat wheels on nearly all of the carts I have. I'd much rather give up some total capacity (not approaching the limits anyway) and never have to worry about pumping up pneumatics.

The Filmtools product features a custom fabrication to get those swivel castors/larger wheels. I'm going to have to find someone to do the modification (different country) but plan to add something similar.

The rubbermaid is mostly going to transport 4x massive plastic crates out of a lighting van. But I also would like to test it as a massive upgrade from the RnR when it's a one trip only type shoot.

I own a RnR and really like it, will take them both for a spin and report back.
 
I know plenty of guys with Rubbermaid carts. The standard move is to remove the regular casters and mount a thick plywood board to the base, to which you attach no-flats or whatever wheels you prefer. The board adds rigidity and also lowers the center of gravity which can be important for not tipping when rolling around with a bunch of stuff on the top shelf. Also cut the board so that it extends out in front of the cart by about 8" (round off the corners 'cause OUCH). This lip acts as a base for tall vertical objects such as tripods and stands. Drill a couple of holes on either side of the cart on the top shelf near the front and you can hook a bungee cord through to lash the tripods and stands in place.

The biggest plus to the Rubbermaid solution is that it's sturdy & cheap. The biggest negative is that it doesn't collapse down for storage or transportation. You're not flying with one or even sticking it in anything smaller than a van.
 
I know plenty of guys with Rubbermaid carts. The standard move is to remove the regular casters and mount a thick plywood board to the base, to which you attach no-flats or whatever wheels you prefer. The board adds rigidity and also lowers the center of gravity which can be important for not tipping when rolling around with a bunch of stuff on the top shelf. Also cut the board so that it extends out in front of the cart by about 8" (round off the corners 'cause OUCH). This lip acts as a base for tall vertical objects such as tripods and stands. Drill a couple of holes on either side of the cart on the top shelf near the front and you can hook a bungee cord through to lash the tripods and stands in place.

The biggest plus to the Rubbermaid solution is that it's sturdy & cheap. The biggest negative is that it doesn't collapse down for storage or transportation. You're not flying with one or even sticking it in anything smaller than a van.

Thanks Mitch!

It seems like it’s more of an East coast cart is that right? I think I read that on a cinematography.com forum..

I like that extended shelf idea. Although I’d probably add vertical walls to make an enclosed box, otherwise I might just try drilling a stand rack to the end, I need to try some combinations first.

And yes, that’s what I love about the Rubbermaid. If you have the space for transport, you’re not paying exorbitant prices for the collapsing function.
 
Still early days but here you can see a side by side - RnR vs. Rubbermaid.

I modified the rubbermaid with 10 inch puncture proof wheels. Sorry Mitch, I didn't go with the plywood base - existing holes underneath the rubbermaid lined up perfectly with the castors I bought. Plus it says each shelf is rated at 250 lbs/113kg and I don't think I'll come close that regularly.

carts1.jpg

carts2.jpg
 
The Rubbermaids are more a East Coast thing, & NYC ACs often store theirs at the Rental Houses. LA is about Magliner mods, & the collapsable camera carts from Backstage, or Yaeger & Sons. Rubbermaids are also widely used in the larger Still Photography studios throughout the USA.

Inovativ has made some inroads on both coasts, but are nowhere near as popular as those previously mentioned, while Rock N Rollers are most often utilized by Craft Services.

Hampers are popular for G&E on the East Coast, & to a lesser extent in San Francisco, but don’t remember ever seeing one in LA.

Seems the preference in carts is dictated by the ‘terrain’. In NYC, & San Francisco, the carts need to navigate elevators, & tight spaces, while in LA they regularly get dragged around beaches, deserts, & other ‘off-road’ locations.

I currently have three carts for different uses, however they mostly sit around in storage. A Filmtools’ Camera Assistant Junior is my workhorse, & a old RnR occasionally comes out of retirement if there’s a lot of cases to be moved around on smaller crewed gigs. Also have a Fold-It Utility Cart that can be handy on rougher terrains (beaches, forests, etc) but have also seen them used for photo shoots on some of the remaining cobblestone streets of NYC.

https://www.amazon.com/Tipke-2100-Marine-Fold-Utility/dp/B00006LPPJ
 
Last edited:
Bern with the camera cart history lesson!

I only just came across Yaeger & Sons recently. They look like a company with a hospitality background changed industries and started making production equipment. I’m sure they’re good though.

I’m with you, different setups for different shoots.
 
Still early days but here you can see a side by side - RnR vs. Rubbermaid.

I modified the rubbermaid with 10 inch puncture proof wheels. Sorry Mitch, I didn't go with the plywood base - existing holes underneath the rubbermaid lined up perfectly with the castors I bought. Plus it says each shelf is rated at 250 lbs/113kg and I don't think I'll come close that regularly.

View attachment 136206

View attachment 136207

Hey, whatever works for you. I like the wood base because it adds storage by sticking out the front. Just drill your holes as pass-thrus for the existing wheels and use longer bolts.
 
Found an old pick of the Rock n Rolla with top shelf engaged:

48674748386_5ab6aea967.jpg
 
Here's my rock-n-roller modification.

I wanted to move long objects in a vertical position while things like cases go on the shelf. The extension rack is a pretty poor option and those grip n gaff bags don't really do it for me. This set up lets me add/remove items without strapping anything in and there's no struggling to pack too many items - it's yes it fits or no it doesn't. I can also grab cases without moving tripods/stands.

I keep it assembled permanently, so the extra footprint isn't an issue. I added another handle in the middle, which secures the box (no tilt from the end handle moving forwards/backwards), as well as letting me attach the top shelf like normal.

I like the tripod hooks used on magliners, yaeger and inovativ carts but this way lets you keep the tripod head attached to the legs. My plan is to add some type of quick release using the hole on top of one of the handles like a poor man's bowl mount.

This design is mostly an experiment. I'll see how the box works, if it could be a different size, dial in shelf heights etc. before I get a custom one made. I'm happy so far but would rather 10 inch front wheels vs. the 8 which are on there. The stem/pin system seems much less common than the swivel wheels that end in plates with 4x holes for screws/bolts. The shelf looks uneven but it's only the photo. I still need to cut the ends of the bolts sticking out but you get the idea.

RNR.jpg
 
Last edited:
Hi Rob,

Looks like the box is bolted in and helps with the overall integrity of the cart?

I've been looking at making some small mods to my RnR cart. I have to keep it foldable. I found some bolts that make assembling the shelf easier or faster. Though, I am on the lookout for a good aircraft style pin. I wish I could get all 4 bolts to be quick release, bt the nature of the assembly requires at least two bolts with a screw on nut. Then I use two quick release pins for the other two. this just makes it easier for me to assemble by myself, as holding up the shelf and trying to mess with the manufacturer supplied bolts and wing nuts is awkward.
 
Hi Rob,

Looks like the box is bolted in and helps with the overall integrity of the cart?

I've been looking at making some small mods to my RnR cart. I have to keep it foldable. I found some bolts that make assembling the shelf easier or faster. Though, I am on the lookout for a good aircraft style pin. I wish I could get all 4 bolts to be quick release, bt the nature of the assembly requires at least two bolts with a screw on nut. Then I use two quick release pins for the other two. this just makes it easier for me to assemble by myself, as holding up the shelf and trying to mess with the manufacturer supplied bolts and wing nuts is awkward.

Yes, bolted into both handles, no need for bolting into the bottom. I was never worried with the cart's "sway" so I don't necessarily see it as a noticeable improvement in this area but I'll take the new rigidity.

When I disassembled it I was reminded of the pain of one person attaching the top shelf. I think all you need is a longer bolt, threaded rod, rod with hole (anything you want) for one end of the top shelf. You can insert that first, then will be free to easily go through the holes at the other end with the stock screws, another rod or quick release pins.
 
Rubbermaid cart handle modification:

- replaced bulky stock handle with speed rail
- powder coated speed rail candy pink.

Reasons:
- really long objects can more easily be placed on the top shelf
- stronger
- easier to clip things to it e.g. carabiners with tape/clamps
- less bulky if being transported vertically
- looks awesome

The powder coating is a proof of concept, I may have to dip everything now.

More to come...

rubbermaid mod2.jpg
 
Nice! Yeah, I can see you sticking a couple grip clips to the top to keep longer items from rolling off the top as you move. Best looking Rubbermaid I've ever seen! Good modding!
 
Dunno if I ever showed a snap of current cart. Simply for moving a pile of boxes/cases but also the scaff handle takes dougty clamps and therefore a monitor or whatever

The join between the handle and the floor is a bit special - super tough but needs an allen to dissasemble.

Got the chassis from a scrapyard, the handle was custom welded, the joins have custom lasercut bits, the wheels are from my od cart - I hope to upgrade them - as noted above many wheels have the same bolt spacing (which is a search element on UK RS website)



_SMM1682.jpg

_SMM1685.jpg
 
Back
Top