Azden Field Mixer

Re: Azden Field Mixer

At the risk of sounding...Have you set the input levels on the camera itself?
 
Re: Azden Field Mixer

It was overmodulated even though the limiter was set on the mixer and the input levels were really low on the camera.
 
Re: Azden Field Mixer

Do you have the K6 or K6P powering modules for your mic? Other than that, it's possible there's something wrong with the mixer itself.
 
Re: Azden Field Mixer

I found this too.


Re: how to setup DVX to record from mixer
« Reply #3 on: Oct 9th, 2004, 10:45am » Quote Modify

--------------------------------------------------------------------------------
send 1 tone 0 dbu line level from the mixer -adjust the level on -20dbfs (the 4 white line from the last red ) run the picks on the mixer at +6-+8 at least , it still will give you 12 db of headroom for unexpected loud sond levels , you can open the mixer limmiter in +15 -16 db , if you wont to be more hooly then the pop you can open the limiters on the camera (alc -on -6dbfs start -4.5)
the -12 dbfs reference is not good for dialog recording , usially the picks can be much hier , to run the mixwer low is also not good , the -12 setting used mostly for musick or sourser which where already compreesed
 
You must log in or register to reply here.
Back
Top