Another Lighting Write up.... basics.... <<<UPDATED>>>

This was great for sure. Would you be able to continue it by maybe giving some examples of how you decide what lights you use/where you put them to get the various moods you're looking for. I work g/e and am familiar with the equipment and the lights, but I don't know the theory as to where/why. Perhaps you could go through some theory? Thanks again!

OK then.... Good question.


As a DOP, your job is to work in collaboration with the director to tell the story in images. The Director has final say, and some times the director wants a very specific image, and "sees" the story in his or her head. Then again sometimes the director focus on acting, and the blocking in the scene, and relies on the DOP to capture the essence of the emotional or physical impact of whats happening on camera.

The mood of the photography really helps to tell the story. So lets go though a couple of moods.

Fear:
fearvv.jpg


This was from Jack Daniel Stanley's "Cold Calls".

The main heroine is being accosted by a creepy phone call.

What do we need to express. She is alone. She is scared. She has no idea where the Caller is.
So i lit the scene to have the feel of a dark moonlit night. For the most part, i throw the rules of three point lighting out the window. it really only works for interviews. Now if you've ever sat in the dark, and actually looked around you will notice, though dark, once your eyes adjust, there is actually light everywhere, even in the deepest shadows. So to shoot a dark scene like this, i actually put up a 500w softbox and put 3 sheets of CTB on the lamp. this dropped it down a couple stops, and gave the room a VERY cool color temperature. Despite the fact that i was shooting on tungsten lamps, i set the camera to 56K and let the room go a bit blue. This sells the moonlight, and fills the room with a soft light thats not terribly directional. I allowed the camera to intentionally under expose a half stop. When youre shooting on DVCproHD, 5D, EX1 whatever...., in 56K you can let the cameras go a little under if youre using blue light. The grain appears in the reds before the blues. hence why the shot looks clean, despite the low luminosity. There were a few small nightlight like practicals on in the room, and they brought the background to life. I had my gaffer Phil Warren put half CTB on the practicals to bring them into play in the now blue world. I feel the shot reads solitude, anxiety and fear. The performance allowed it to gel in a very effective way.

Drama:

romantic.jpg

dramaf.jpg



These images are from two dramatic film i shot.

The first, a love story, needed a soft dreamy feel and the location, lent itself to this. The tall summery grass, and warm sun gave this piece a romantic nostalgic feel. the actors, literally rolling in the grass agreed. To keep the midday sun at bay we used a huge silk, held a few feet above the frame line to soften the shadows. Essentially using the sun, and existing light, to modify it to create a pleasing image.

The second and third images are from John Levy's "Deep Score" needed a naturalistic feel to sell the story. It was supposed to have occurred in a realistic world. I augmented daylight again, by assiting the natural light coming into to the room from huge windows, by attaching 4, 4x4 kinoflow banks to the the ceiling. This gave the sunlight the necessary boost to bring the room up to exposure while mimicking the direction and source of natural light... in essence making the film look completely natural, though a majority of the light is actually man made. ( roger deakins is the master of this...)



Horror:

"Samantha"
horror4p.jpg

horror1.jpg


Cannibal Corpse "Evisceration Plague" (sorry for the crap quality, i had to frame grab the stills from Vimeo)
horror2.jpg

horror3.jpg


When it comes to horror... all the rules go away. Your lighting sources can be anything really, same goes for placement and the quality of the light. In Samantha, The black and white film, i lit that to looks like a surreal doll house. The director and i wanted it to look like a black void, with random bits of furniture. Despite the set being built from scratch, we did our best to obscure it.

The Cannibal Corpse Music Video Evisceration plague, was modeled after a shaft of sunlight that penetrated the old wooden slats of the barn location we were shooting in. We simulated that natural light again, by putting several 2.5k HMI lights outside ever window, and crack we could find in the buildin, and simply centered the action around the shafts of light. The stark contrast, makeup and physicality of the actors make the terrifying strory of zombies chasing a young man come to life.


IF you guys have questions, keep em coming!
 
The mood of the photography really helps to tell the story. So lets go though a couple of moods.

Fear:
fearvv.jpg


This was from Jack Daniel Stanley's "Cold Calls".

The main heroine is being accosted by a creepy phone call.

What do we need to express. She is alone. She is scared. She has no idea where the Caller is.
So i lit the scene to have the feel of a dark moonlit night. For the most part, i throw the rules of three point lighting out the window. it really only works for interviews. Now if you've ever sat in the dark, and actually looked around you will notice, though dark, once your eyes adjust, there is actually light everywhere, even in the deepest shadows. So to shoot a dark scene like this, i actually put up a 500w softbox and put 3 sheets of CTB on the lamp. this dropped it down a couple stops, and gave the room a VERY cool color temperature. Despite the fact that i was shooting on tungsten lamps, i set the camera to 56K and let the room go a bit blue. This sells the moonlight, and fills the room with a soft light thats not terribly directional. I allowed the camera to intentionally under expose a half stop. When youre shooting on DVCproHD, 5D, EX1 whatever...., in 56K you can let the cameras go a little under if youre using blue light. The grain appears in the reds before the blues. hence why the shot looks clean, despite the low luminosity. There were a few small nightlight like practicals on in the room, and they brought the background to life. I had my gaffer Phil Warren put half CTB on the practicals to bring them into play in the now blue world. I feel the shot reads solitude, anxiety and fear. The performance allowed it to gel in a very effective way.


That "fear" look is actually the EXACT look I want for my next film (a boxing/gangster film), and I'm no DoP -- but with the money I have, I have to learn what I can and make do. So, thanks for showing this!

From what I read you used a softbox, a lamp that you wrapped (do you wrap it?) CTB (and those are gels, right?) around, fiddled with your cam (which was what? I have a Canon HV20) to get this 56K setting (is this lowering the amount of light you let camera take in), and wrapped CTBS on nightlights to for the backlight, I guess.

Yeah, that's my guess. I really admire dramatic lighting and how subtle and powerful it can be, but I honestly don't know much about it.
 
Also, can you put a drawn diagram of how that fear scene was lit? That'd help me as I learn visually. Thanks.
 
That "fear" look is actually the EXACT look I want for my next film (a boxing/gangster film), and I'm no DoP -- but with the money I have, I have to learn what I can and make do. So, thanks for showing this!

From what I read you used a softbox, a lamp that you wrapped (do you wrap it?) CTB (and those are gels, right?) around, fiddled with your cam (which was what? I have a Canon HV20) to get this 56K setting (is this lowering the amount of light you let camera take in), and wrapped CTBS on nightlights to for the backlight, I guess.

Yeah, that's my guess. I really admire dramatic lighting and how subtle and powerful it can be, but I honestly don't know much about it.

Since nobody replied, I'll take a stab at your questions. I'm no DP either but here's what I think:

CTB is color temperature blue gel. Get cinema gels since they should be less likely to melt. Don't wrap these directly around the lamps (lamps are what people like me call bulbs) or they'll melt if it's a tungsten light. Just clip the gel onto the light housing inside the softbox.

"Fiddled with your cam." This is where you adjust your exposure. You have an HV20 so it's tough to control exposure. You can control the aperture but I'm not sure it'll let you underexpose. See here for tips: http://dvxuser.com/jason/hv20/ I'd go with a 1/48th shutter and adjust the exposure in post with your editing program.

Once you've gelled the lights you could adjust your white balance to tungsten like the OP suggested. This makes everything bluer. Your camera's tungsten white balance is probably an attempt at 5600k which refers to the color temperature of light when compared to a burning hot rod of iron. The higher the number, the hotter (bluer) the temperature. Just adjust your cam to the tungsten setting and you'll be good.
 
TheJetBlack, First of all you should google and try to understand some key terms so it will help you decode Timur's words.
-500watts soft box, you could see the sample on first page.
-CTB, Color Temperature Blue Gel. (They come with 1/8, 1/4, 1/2 and Full. In this case, I believe he is referring FULL CTB)
It is a sheet of gel or could be come in a roll. Since he is using a Softbox, CTB gel will be more likely apply on the outside of the box, where the square is by using Cloth Pins or Binder Clips.
-56k, 5600 Kelvin Temperature on the camera (aka day light balance), 32k, 3200 Kelvin Temperature on the camera (aka tungsten balance)
You have to tell the camera, What is defining white.. normally manually you could set 32k and 56k (better camera can choose from 2,000k to 10,000k)
http://www.cambridgeincolour.com/tutorials/white-balance.htm
-To underexpose, you don't always need to adjust the camera setting, if you don't have manual exposure setting.... You could put a ND 0.15 filter in front of the lens, you could put ND 0.15 gel in front of the lights, you could walk the light back or tell the actress take a small step back, or you could hook up dimmer to get the light intensity lower to achieve half stop under-exposure,... for me I will just tell the actress take a small step back.
-Night Light with Half CTB for Background and Ambiance, not backlight.
Night Light is tungsten (32k) by putting Half CTB on, it will become less orange (44k). So the color contrast in this scene won't be fighting Orange VS Blue. It will create froth ground and back ground layer because of the color but they are definite melting together, not fighting against.
http://en.wikipedia.org/wiki/Color_correction

In conclusion, Timur wanted to have a scary lonely look, for night time scene.
Night Scene...dark, moon light- Blue, Soft, some nightlight lamps to fill up the room.
Then go into tech... To create Blue tone and soft.... how about a 500 watts softbox, since it is tungsten, I should put some blue gel on.
mmm.... white balance the camera to 56k, will give a better blue look then 32k with blue gel.
Now the camera is daylight balance (56k) and 500watts softbox is giving me blue tone. But wait something wrong with the picture, the nightlight is orange now (32k), lets put some color correction Blue gel on to bring down the contrast between key light and background lights.

If you don't understand... you should test it out with a desk lamp with some gels to get to a better understand. Local rental house always have some small cut of gels that wanted to throw away, put them up. Also you could watch video on Youtube. Good Luck, hope you understand this time.
 
Back
Top