If you have the OST 801/802, the Tram (TR50) type clips can be rotated not to mention all the OEM Tram TR50 clips and mounts can be used. For the TL40, I have clips that attach to the mic's cable. That said, I do not use clips much anyway and usually hide lavs on the talent using surgical tape...
Try a Sony ECM-55 lavaliere, it is omni directional, but isolates the wearer from extraneous noise and room reflections well. Unfortunately it is large compared to most lavs these days. The only time I use cardioid lavs is when feedback is an issue in conjunction with a live sound system.
FWIW, I use -16 LUFS (Integrated) for podcasts and other dialog driven steaming projects. -14 LUFS (Integrated) for music projects: I keep True Peaks (dBTP) above -1.0 in either case.
You could use PluralEyes to automatically sync the second system audio to the cam's audio, but it depends on what NLE you are using. Many folks use PE when TC is not an option and/or to sync multiple cams.
The XLR Phantom Power adapters are generally expensive and add to the cost of a mic even when it is included.
Some have the option to use a battery instead of Phantom, for instance my Tram TR79 cost $180 (usd) twenty years ago.The TR50 mic alone with a TA5 plug was well over $200 as I recall.
Lav mics in general require bias voltage (aka, plugin power) which is typically 2 to 5 volts. The DR-40 supplies Phantom Power, which is a different animal, so a standard 3.5mm plug to XLR adapter will not work. To use the lav hardwired to the DR-40 (or other XLR input with phantom power) a...
Recording transmitters are expensive and few and far between in the USA. Partly due to Zaxcoms's copyright. Some manufactures have gotten around it or have paid licensing fees. There are work-arounds with custom cables to feed both a Tx and a recorder from a single lav mic, but I am not aware of...
If the center (mid) element can be ISO'd in post, it 'may' be usable for dialog if close to the source. 32 bits (FP) is advantageous for a OMB operation.
'The AT-4025 would work to capture stereo 'nat sound' but a shock-mount would be wanted for a cam. The AT 40 series mics are good but not typically considered in the 'low-cost' realm. Under $1k though..
"Didn’t Sony have one that was even worse (bigger)?" The original ECM-50 may have been slightly bigger and was silver .. not available in black. The ECM 50s where powered by a N-cell battery. Phantom Pwr was not an option .
I love the B6.. easy to hide.. even in plain sight, but it does not isolate the wearer any better than the other go-to omnis and is sensitive to air turbulence. The best 'proximity' omni lav mic I have used is the ECM-55, unfortunately it is HUGE by today's standards.
$300-400 is not much if it is a hardwired earset mic, if you are plugging into a pro mixer or interface, the power supply/XLR adapter adds about $100 (or more) to the base price. If your already have a wireless system or are plugging into a 3.5mm mic input, that is significantly less $. Get an...
I think the XWS is the one of the Sennheiser models that has an inherent 19ms latency (approx half frame delay), which is annoying when monitoring live.
Internal antennas in H/Hs are usually not an issue.
Off-hand and without working on the file, the only software I can think of is SpectraLayers Pro and RX Advanced. and editing an audio.spectral graph has a steep learning curve.. though it may be a bit easier if one has previous experience with Photoshop or other advanced image editing software...
Get a shock mount for the mic. AFAIK the SM7's capsule is dampened somewhat, so a additional shock mount is not usually necessary. If an an excessive amount of preamp gain is applied, that would amplify handling noise as well, That particular mic is meant to to placed in very close proximity to...
I have Steinberg's SpectaLayers Pro which can create 'stem' or 'component' files that would likely give you the option to remove the BG music. There are other options in SLP as well. I think iZ's 'RX Advanced' has 'similar process' too but it's is 'a little' pricey. The low cost RX Elements...
Generally, YT's conversion process seems to work decently with AVC/AAC source files. However there are many factors the can affect uniform playback and A/V sync regardless of the source media. The PC, smartphone, router, browser, internet connection & speed are only a few.
The Sound Devices MixPre 3 is relatively small with pro features in sound and build. The second generation MixPre II series, offers floating point 32 bit recording, which is good for OMB folks who cannot monitor levels closely. It is more expensive than the Zoom H series recorders.
Off-hand, I...