Hiss In Audio Any Way to Reduce

piercep

New member
I've creating a documentary on the virtual world Second Life . A woman i know owns a fashion line inside the game. She makes enough off selling these clothes to support herself and her family. I covering her as she tries to grow this business into something larger.

We're using the Sennhiser MKH 416 mic. I was wondering if there is anyway to reduce the harsh hissing which the mic picks up when my subject uses any “s” sound. I've included a link if you'd like to listen. Thanks for your help.


CLICK TO LISTEN TO THE HISS QUICKTIME FILE
 
You got yourself some sibilance there. Generally the way to avoid this is thru mic position. Also keeping your speaker well hydrated helps a lot with this and the nasty clicking you get when their mouth dries out.

If you are trying to save it in post, run a compressor with a high/low pass filter set right below the frequency of the sibilance (can find this visually on the waveform).

Good luck.
 
Wabbit, a fellow Seattlite. Incredible.

You mentioned mic position as a way to solve this problem. The mike was placed five feet away from her mouth on the ground inside my empty show with the head of the pointing straight at her mouth. We don't have a large enough crew to boom the audio. What mic position do you suggest?
 
Well, siblilance usually happens when you the mic in close and pointed directly at the mouth. You would back it off slightly and get the mic pointed slightly away from the mouth. Sibilance is the high sounds of the 's' ('c' and 'z') are actually distorting. From 5 feet away and no mic control you are looking at just turning the gain down a tad. Getting the mic in closer on a boom will give you better control and better sound overall.

Your speaker does have some slight clicks in her pauses so I am guessing she also could have used some water.

There are a few of us Northwesterners in here...REPRESENT!!! :)
 
Pierce, do you own a compressor? Even a 89 dollar Alesis 3630 will do. That with an EQ, especially a 30 or 31 band, will act together as a great de-esser on site. The better one does in production the better (and easier) post production goes. Of course this doesn't do much for your captured audio; but for future reference.

What I do:
Run Mic into mixer (Mackie 1402VLZ). Use mixers insert jack to connect the compressor. Connect an EQ to the compressors side-chain jack. (Sounds like a lot to do but it is easier to do than type out)

Leave the EQ "flat" except for the offending frequency(ies). Excessive sibilance could be around 2K-3K on up. Those are what you want to boost, say, 6db or even up to 12db .... depending on mic and persons voice. With that boost, the EQ will kick in the compressor just for the s's and some t's, etc. Use the compressor controls like normal to adjust how much compression, attack, release, etc.

Hope this helps.

Larry
 
I don't want to make another topic out of this, so I will just ask here... but how would you get rid of that low-range static in the background? Is there a decent program out there that can help get rid of that? Sound in real films is always silent unless they're speaking, and it always sounds so rich... can that type of sound ever be achieved with like a me66/k6 or any of those lower-ranged mics?
 
Noise Reduction on the cheap

Noise Reduction on the cheap

dj200423 said:
I don't want to make another topic out of this, so I will just ask here... but how would you get rid of that low-range static in the background? Is there a decent program out there that can help get rid of that?

For hiss, hum and other constant noise, try a multiband noise filter (the free audio editor Audacity, available here audacity.sourceforge.net has one).

You feed it a sample of the noise you want to get rid of, such as a quiet passage where no one is speaking, tweak a few parameters, and let it work its magic. I've heard pre-Dolby cassettes from the mid-70s cleaned up almost to CD quality this way.
 
ebw3 said:
For hiss, hum and other constant noise, try a multiband noise filter (the free audio editor Audacity, available here audacity.sourceforge.net has one).

You feed it a sample of the noise you want to get rid of, such as a quiet passage where no one is speaking, tweak a few parameters, and let it work its magic. I've heard pre-Dolby cassettes from the mid-70s cleaned up almost to CD quality this way.

Thank you very much! I will definitely look into that
 
Back
Top