Audio-Technica AT835b

Re: Audio-Technica AT835b

Is this for genaral purpose work? This mic is good at fairly long range. I have not used it for music or close interviews yet. Someone else may address those uses.

Physically, this mic is pretty long and thin.
If you try it on the DVX mic mount it will be loose (without using some sort of adapter or shock mount) and will appear in the picture unless zoomed past about 22.
I have one, but I use a universal mount on the top of my DVX with a 18" XLR cable (not included) - works fine this way. A boom/stand mount is included.

Hope this helps.
 
Re: Audio-Technica AT835b

Thanks.
Helps a lot.
So it seems i should also get an adapter mount for the camera.
It will be use for recording dialogue mostly. Not for music but maybe for close interviews.
 
Re: Audio-Technica AT835b


if i were you i would try and get a good deal on a used sennheiser me-66

i am not looking to get rid of mine but i am upgrading so something a notch or two up the scale but i know a LOT of people start out with this mic and a many of them will upgrade to something better later on like the sanken cs-1 or cs-3

post something in the marketplace forum to see if anyone has one they would like to sell.

matthew
 
Re: Audio-Technica AT835b

i own an AT85b. when i went ot the sound store it was either this one or a more expensive one so i bought this one. i have not tried it yet but am getting worried from your comments. Soliton you seem to suggest that such a long mic is not ideal to be used as a normal boom mic the kind that one hangs over the heads of the actors. does this mean that if i use it for this purpose my results will be not as desirable?
 
Re: Audio-Technica AT835b

any one know anythign about the  SGM 1x??? its liek 100 cheaper,its looking good to my budget.  any comments?

(i know i know i spent 3300 on a camera and im gonna screw it up with a 150$ mic.)

Im more just curious is the difference between the $150 SGM1X and the $250 SGM 2X Very noticeable? is teh SGM1X gonna ruin my work with bad sound? i will be using it mostly for party coverage and Art documentation.  im not makng any serious films yet.
 
Re: Audio-Technica AT835b

I think he was saying that it is not ideal to mount on your camera as you have to zoom in to about 22 in order to not see it.
 
Re: Audio-Technica AT835b

you mean Schreiber? I worked on a rinky dink kiddy project before I got my ME66 (which I am pleased with) and they had a schreiber shotgun...but they were newbies, and certainly didn't know their gear. I am convinced that the mic was super low end, but I was really pleased with what I was monitoring.
 
Re: Audio-Technica AT835b

I am getting this mic (835b) for Christmas, I would also like to know how this mic performs in recording dialogue in film. I would be using it on a boom mostly.
 
Re: Audio-Technica AT835b

I had one and it sounded good. It provided me with satisfactory results, my only qualm was that it was very long on the DVX, but for you, using the boompole, it sould be great for sound gathering and provide you with far better results than the stock mic.
 
Re: Audio-Technica AT835b

I've been using one for a couple years with no complaints -- best to put in on a boom with suspension, though, and keep in within a few feet of your actors when possible.
 
Re: Audio-Technica AT835b

I have two of these and am very pleased with them.

It is possible to mount in the DVX100A mic holder.

If you push the wind shield foam forward a little so that the clamp comes just up to the first slot in the microphone and tighten the clamp there you can zoom right out and the microphpne does not show int the frame.

The clamp does not need any packing and the camera noises are kept extremely low.
I have the low cut switch on for most things.

I have been using them for bands and church choirs and dramas.

Hope this helps
 
Re: Audio-Technica AT835b

I just got off the phone with EVS and they recomend this mike if you can't go for the Mk66. I am in this boat and will be ordering one of these soon. Wish I had 500+ for the MK66 kit. EVS says this one sounds as good!! Will see.
 
Re: Audio-Technica AT835b

I have both an 897 and an 835b. I am very happy with the performance of the 835b for film dialog off a boom and in a pistol grip. We used to use the bass rolloff highpass filter for nearly everything until we got a proper windjammer on it, now it's clean & clear throughout.

The 897 can be camera mounted, but if you use a mattebox or matteblox you may find that the mic hits the box and becomes unusable. Its sound is not nearly as good as the 835b anyway, so it's of questionable value on-camera. If you are going to get just one I'd get the 835b and boom mount it.

Good luck!
 
Back
Top