Analyze This package Gurus

STYLZ

Well-known member
Going to be needing a shotgun mic package for any future gigs and for upcoming 48 hour film fest here in Vegas. Need the sound gurus to tell me if this shotgun package I assembled at B&H (online) is doable, right for the price, and if there would be any wierd incompatibilities.

Any help appreciated.
Larry

Remote Audio
Universal Microphone Hand Grip for Shockmounts
MFR #GRIP • B&H #REGRIP

Our Price:
$35.00


Rode
SHOTGUN WIND SCRN f/NTG1/NTG2/VIDEOMIC
MFR #WSVM • B&H #ROWSVM

Our Price:
$19.95

Audio-Technica
3-pin XLR Male to 3-pin XLR Female Balanced Cable - 20 ft
MFR #AT831420 • B&H #AUAT831420

Our Price::
$18.95



Rode
NTG-2 Battery or Phantom Powered Condenser Shotgun Microphone - ...
B&H #RONTG2K (comes with shockmount and 1.5ft cable right angled)

Our Price:
$269.95

Rode
BOOMPOLE f/NTG-1 / NTG-2 /VIDEOMIC
MFR #BOOMPOLE • B&H #ROBP

Our Price:
$79.95



Sub Total: $ 424.29
Total: $ 424.29
 
you'll need better wind protection for any outside use (a la rycote or similar, a softy will do)... a $19 prob wont cut it sometimes, but hey thats ur call.
 
Um... headphones?

I'd reccomend the Sony MDR-7506. You can get by using consumer-grade circumaural headphones, but cheap headphones lead to unpleasant surprises when you're screening your dailies. Also be sure to have a long enough headphone extension cord to reach from the camera to the boom op'.

Other than that, you appear to have everything you need, strictly speaking.

I'd reccomend that you make yourself a short (3 or 4") XLR jumper out of the most flexible high-quality ballanced audio cable you can get your mitts on. This jumper would connect the mic (in the shockmount cradle) to the 20' mic cable (attached to the end of your boom pole). Attaching a stiff XLR cable directly to the mic will compromise the effectiveness of the shockmount (mechanical vibration will transmit along the cable). The jumper will further isolate the mic, rather like those Rycote Conbox dealies. It's not exactly crucial, but it'll let you get the most out of an inexpensive shockmount.

The RA pistol grips are great, but you can shave a few bucks off the price by buying a cheap mic stand ($5 or so, as well as a 3/8 to 5/8 thread adapter if neccessary), and cutting it down to pistol-grip size with a hacksaw. File off the burred metal edges, wrap it up in foam rubber or hockey tape, and you have yourself a dandy little pistol grip. Not pretty, but serviceable. Now, take the $30 you've just saved and buy yourself better wind protection.

The other thing you should definately bring along is a spare mic cable. Bad things happen to good cables, and if your only mic cable is damaged then you'd better start pricing an ADR session.
 
i'm not familar with that boom...for that price it is probably aluminum.

i would spend a little more and get one of the gitzo carbon ones.

they are a little more but for under $200 you can get a nice gitzo carbon model.

matthew
 
Back
Top