Announcement

Collapse
No announcement yet.

AC adapter wanted

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    AC adapter wanted

    Hey! Does anyone have or know of an aftermarket AC adapter that works with the F35? THANKS!!

    #2
    I use the Anton Bauer Tandem and Sony has something similar. The Hedbox dc-80 travel charger has a xlr adapter that should work with the if box.

    Comment


      #3
      https://www.bhphotovideo.com/c/produ...IaAuFCEALw_wcB

      Comment


        #4
        If you want to go cheap, old school and original for the F35 there is this this.

        Comment


          #5
          Thanks guys! Appreciate it! RayZan have you personally used the Core SWX Cube 200 Power Supply on the F35?

          Comment


            #6
            Originally posted by bigmitch View Post
            Thanks guys! Appreciate it! RayZan have you personally used the Core SWX Cube 200 Power Supply on the F35?
            Yes. I have one. Works flawlessly. For both F35 and F65 and it's super light. You'll need to a cable that has 4 pin xlr on one end and the 8 pin lemo one for the camera on the other end. I made mine myself.

            Comment


              #7
              Awesome thanks man! Appreciate it!

              Comment


                #8
                RayZan from your experience do you believe this cable would do the trick? https://www.ebay.com/itm/265101067055

                Comment


                  #9
                  The ARRI connector is too small.
                  This one is proper.
                  (But you’d have to ask for the XLR instead of P-Tap)
                  Last edited by CelesteCassidy; 11-10-2021, 10:16 AM.

                  Comment


                    #10
                    Here’s a useful thread.

                    Comment


                      #11
                      Thank you!

                      Comment


                        #12
                        Originally posted by bigmitch View Post
                        RayZan from your experience do you believe this cable would do the trick? https://www.ebay.com/itm/265101067055
                        Unfortunately not. I also was looking for a ready made one and could not find it. So I had to solder my own. On the XLR pin 4 is +ve and 1 is -ve. On the Sony 8 pin, I have to lookup what it was. You only need to solder 2 of the 8 pins. After that, verify with a voltmeter that you have the polarity right. If you reverse them, you'll damage the camera. I'll lookup carefully what the 8 pin was. But someone here might know already.

                        Comment

                        Working...
                        X