DVXuser.com ::: Rowecine dolly wheel set

ATTENTION: DUE TO MANUFACTURING DELAYS WE WILL NOT BE SHIPPING ANY WHEEL ORDERS UNTIL APX. NOV 15th 2006. ANY WHEEL ORDER PLACED DURING THIS TIME PERIOD WHICH EXCEEDS 2 WEEKS UNTIL THE SHIP DATE WILL RECIEVE $25.00 off. HANDLE ONLY ORDERS WILL CONTINUE SHIPPING AS USUAL. (date of notice Oct 10, 2006)

Available in 4, 6 or 8 offset wheels per corner, in 1' lengths or 4' length rails
These are all straight track kits, and do NOT swivel. The wheel mounts are ultra low profile, so the dolly
only sits about 1/4" inch above the top edge of the wheels, and rides very low to the track ...which is good …very good.

Highest quality ultra thick and juicy custom manufactured Rowe Cine dolly wheels with reinforced stainless ABEC 5 bearings.
These roll very, very smoothly and very, very quiet. Also included are 2 extra wheel bearings.
The wide wheels on the supplied mounts will accept between apx. 3/4" and 1 1/2" rail.
The recommended track for riding is, or 1" thick walled PVC rails, or metal rail. The trucks will also ride on different professional cinema dolly tracks. All wheel bolts are strong rust resistant steel wheel carriage style bolts, so the wheel bearings ride on smooth surface rather than grinding on bolt threads.

The wheel mounting rails are, sturdy, strong, extremely rust resistant, and lightweight fully anodized aluminum. The wheel mounts come supplied with mounting hardware and are precision drilled and tapped to mount directly to your custom dolly platform.

It should be noted that the aircraft quality aluminum trucks are not just drilled to stick a bolt through and tighten it on the other side. They are first precision pre-drilled and then thread tapped , so that the bolt actually securely bolts right into the aluminum truck. Then after tightening into the truck, the wheel carriage bolts are also tightly capped by locking nuts on the backside. This keeps the strength of the unit and can dramatically keep the trucks sturdy and the wheels in place.

All you need is the Platform, Here is an example setup of the wheels with 4' Rail option:

These ship as fully assembled wheel mount kits ready to bolt on to your dolly deck with simple instructions,
including easy to follow diagrams for completing the dolly. Each kit also includes 2 extra wheel bearings, and 2 free
joining connectors for track pipe.

(note: offsetting the wheels means that the wheels on a corner are not directly a crossed from each other. this helps the dolly smoothly transition from track section to section, and also helps your dolly look cool.)

NOW AVAILABLE: DOLLY HANDLE

Now Available! Push/Pull handle for your dolly. These measure apx 45 ½” in length, and feature all stainless steel and aircraft grade aluminum construction with durable all weather, non-slip, anti-vibration hand grips. These handles also feature push button quick release, which allows you to set up or take down your handle in well under 5 seconds. Once the handle is removed, it can be clipped up into the included quick clip hangers, which mount underneath the dolly to secure the handle for transport. These handles also feature a hinged base to allow the operator to pull or push a dolly from an optimal relaxed height. Utilizing the hinge design, your dolly can also go under tables, cars, and other obstacles that a fixed handle would normally prohibit. The handles are very strong, but light as a feather. Just like our cine dolly wheels, these handles come with all mounting hardware, and easy to follow instructions for mounting. These are the perfect addition to our Cine Dolly Wheels, and because we believe in matching performance with beautiful form, these definitely look killer on the set. $110 USA, $140 International. (Includes Shipping) order below.