Most of the HDMI output cameras I've worked with exhibit some processing delay - usually between 2 and 7 frames.
Set up a 'behind the scenes' shot with a second camera that shows your camera's lcd, external monitor and subject being photographed - and have then do some hand claps. Play back in an NLE to see how many frames apart the hand clap is. I was surprised how large some of the delays were. (Don't forget to try at different output resolutions!) And I was also surprised that two cameras of the same model would sometimes yield slightly different results.
Thread: S1H on camera monitor for focus
Results 11 to 18 of 18
-
- Join Date
- Feb 2017
- Location
- NJ / NYC
- Posts
- 418
02-21-2021 05:51 PM
-
- Join Date
- May 2009
- Location
- Missoula Montana
- Posts
- 1,034
02-22-2021 09:54 AM
Yes I owned a smallhd focus 5 for a minute and I found the lag unmanageable and returned it. I’ll try the port keys see what that does
QUOTE=OnSet;1986858636]Most of the HDMI output cameras I've worked with exhibit some processing delay - usually between 2 and 7 frames.
Set up a 'behind the scenes' shot with a second camera that shows your camera's lcd, external monitor and subject being photographed - and have then do some hand claps. Play back in an NLE to see how many frames apart the hand clap is. I was surprised how large some of the delays were. (Don't forget to try at different output resolutions!) And I was also surprised that two cameras of the same model would sometimes yield slightly different results.[/QUOTE]
-
- Join Date
- Jul 2013
- Posts
- 592
02-22-2021 10:28 AM
[/QUOTE]
Not sure how bad it is with the S1h, but all of my panny cams have had really bad hdmi port lag (on the camera side), so it didn't matter which monitor I used since nearly all of the delay was coming from the GH5, GH5s, etc.
I didn't find the smallhd focus 5 to be meaningfully worse than my other monitors. It was the camera. The Focus 5 is perfectly fine on my blackmagic cams, for example.
-
- Join Date
- Dec 2011
- Location
- Florida
- Posts
- 2,580
02-22-2021 10:40 AM
-
- Join Date
- Oct 2010
- Location
- Rhode Island
- Posts
- 689
02-26-2021 04:54 AM
Matt, thanks for the recommendation the Portkeys BM5 is very nice and love the case so it can just drop in my bag.
Hey Doug, hope all is well?
-
02-26-2021 05:20 AM
Excellent, glad it worked or you, Paul.
Best,
MGMatt Gottshalk
Director of Production
BPI.tv
-
- Join Date
- Dec 2011
- Location
- Florida
- Posts
- 2,580
02-26-2021 07:16 AM
Hey Paul, things are going well but I'm bogged down in the production of an FX6 master class. I'm really, really, looking forward to getting this project done so I can take some time off. It's like childbirth. If I really remembered how awful it was to do the last one, I'd never do another. We're hoping to get up your way this summer so we defiinitely need to get together if things are starting to get back to normal.
-
- Join Date
- Oct 2010
- Location
- Rhode Island
- Posts
- 689
02-28-2021 12:49 PM
Ah yes, you say that every time you do a Master Class. Glad both of you are well. Be great to catch up this summer an get you out sailing, dinner on the porch and some stock shooting. Fingers crossed.