Results 1 to 8 of 8
  1. Collapse Details
    Calibrating an older HP monitor
    #1
    Senior Member scorsesefan's Avatar
    Join Date
    Jul 2005
    Location
    Queens, New York
    Posts
    1,781
    Default
    Hi all,

    I have an older HP Dreamcolor Z24X and I've noticed a slight yellow bias to it. Does anyone know how to calibrate this monitor? A relatively cheap solution would be great because I bought it used a few years ago and it's getting pretty long in the tooth...

    Thanks


    Reply With Quote
     

  2. Collapse Details
    #2
    Still Alive Mod Jack Daniel Stanley's Avatar
    Join Date
    Jun 2005
    Location
    North Hollywood
    Posts
    10,594
    Default
    I was just in your situation recently. Only difference is I just purchased one refurbished. PC Liquidators has them for around $100. Technically you’re supposed to purchase a very expensive calibrator from HP. The HP one leaves a calibration in the monitor hardware. Which is the optimum “real” way it “should” be done. Any other way, short of adjusting the monitor manually, gives a software calibration only.

    I just used a Colormomki and DisplayCal’s free software (which is key— don’t use the xrite software!).

    Display cal provides a LUT or a profile you can load in Davinci.

    I also use a BenQ Pd2500 which is inexpensive and Technicolor certified at 100%RGB and Rec.709 and has UHD. I toggle back and forth between them for working monitor and color monitor.

    The BenQ comes factory calibrated with a paper printout of the response curves and adjustments. In fact, whenever I calibrate it and toggle the calibrated profile on and off, nothing changes.

    This setup has been really great for me as an indie filmmaker — your mileage may vary.
    JACKDANIELSTANLEY.COM
    FREE AWARD-WINNING MOSTLY-HORROR SHORTS FROM
    DVXUSER, TRIBECA, SLAMDANCE, SXSW, TORONTO AFTER DARK, AND MORE...


    Reply With Quote
     

  3. Collapse Details
    #3
    Senior Member
    Join Date
    Oct 2009
    Posts
    585
    Default
    Were you able to calibrate to BT.1886 gamma with DsiplayCal? What's the problem with Xrite's software?


    Reply With Quote
     

  4. Collapse Details
    #4
    Still Alive Mod Jack Daniel Stanley's Avatar
    Join Date
    Jun 2005
    Location
    North Hollywood
    Posts
    10,594
    Default
    For sure. I haven't, but it does it. It's one of those things where it's crazy that it's just free and available for filmmakers. Pretty customizable and powerful IMO.
    JACKDANIELSTANLEY.COM
    FREE AWARD-WINNING MOSTLY-HORROR SHORTS FROM
    DVXUSER, TRIBECA, SLAMDANCE, SXSW, TORONTO AFTER DARK, AND MORE...


    Reply With Quote
     

  5. Collapse Details
    #5
    Senior Member scorsesefan's Avatar
    Join Date
    Jul 2005
    Location
    Queens, New York
    Posts
    1,781
    Default
    Quote Originally Posted by Jack Daniel Stanley View Post
    I was just in your situation recently. Only difference is I just purchased one refurbished. PC Liquidators has them for around $100. Technically you’re supposed to purchase a very expensive calibrator from HP. The HP one leaves a calibration in the monitor hardware. Which is the optimum “real” way it “should” be done. Any other way, short of adjusting the monitor manually, gives a software calibration only.

    I just used a Colormomki and DisplayCal’s free software (which is key— don’t use the xrite software!).

    Display cal provides a LUT or a profile you can load in Davinci.

    I also use a BenQ Pd2500 which is inexpensive and Technicolor certified at 100%RGB and Rec.709 and has UHD. I toggle back and forth between them for working monitor and color monitor.

    The BenQ comes factory calibrated with a paper printout of the response curves and adjustments. In fact, whenever I calibrate it and toggle the calibrated profile on and off, nothing changes.

    This setup has been really great for me as an indie filmmaker — your mileage may vary.
    Thanks, Jack. Is there a way to calibrate it in Premiere Pro?... I was looking at the BenQ in BH. Is it UHD or 2K?
    Last edited by scorsesefan; Yesterday at 06:21 PM.


    Reply With Quote
     

  6. Collapse Details
    #6
    Still Alive Mod Jack Daniel Stanley's Avatar
    Join Date
    Jun 2005
    Location
    North Hollywood
    Posts
    10,594
    Default
    You can't calibrate it in premiere. You can only adjust it manually and really all you can do by eye is brightness contrast with SMPTE bars. To be clear you can't calibrate it within davinci either. The software and hardware calibrator provide a correction that's saved in your computer preferences. Davinci is set up where you can share that color profile with it and it will take that information to make sure the playback or grading windows are presenting images working in tandem for the highest accuracy with the software profile you created in Display cal. So you're not really calibrating it in Davinci, Davi's just using the information DisplayCal gathered and referencing that to send accurate color images to your eyeballs.
    JACKDANIELSTANLEY.COM
    FREE AWARD-WINNING MOSTLY-HORROR SHORTS FROM
    DVXUSER, TRIBECA, SLAMDANCE, SXSW, TORONTO AFTER DARK, AND MORE...


    Reply With Quote
     

  7. Collapse Details
    #7
    Senior Member scorsesefan's Avatar
    Join Date
    Jul 2005
    Location
    Queens, New York
    Posts
    1,781
    Default
    Quote Originally Posted by Jack Daniel Stanley View Post
    You can't calibrate it in premiere. You can only adjust it manually and really all you can do by eye is brightness contrast with SMPTE bars. To be clear you can't calibrate it within davinci either. The software and hardware calibrator provide a correction that's saved in your computer preferences. Davinci is set up where you can share that color profile with it and it will take that information to make sure the playback or grading windows are presenting images working in tandem for the highest accuracy with the software profile you created in Display cal. So you're not really calibrating it in Davinci, Davi's just using the information DisplayCal gathered and referencing that to send accurate color images to your eyeballs.
    Ah, got it... BTW I noticed your avatar. I have an amusing Peter Dinklage story. I live near wburg Brooklyn and I think he must live there or near there. One day I saw a little person on a bike get cut off by an SUV and he punched the driver's side window... Well, it was Dinklage and instead of a horrible road rage incident the guy in the SUV just kept looking at him in awe and probably thinking "Tyrion Lannister just punched my window LOL"...


    Reply With Quote
     

  8. Collapse Details
    #8
    Still Alive Mod Jack Daniel Stanley's Avatar
    Join Date
    Jun 2005
    Location
    North Hollywood
    Posts
    10,594
    Default
    Quote Originally Posted by scorsesefan View Post
    Ah, got it... BTW I noticed your avatar. I have an amusing Peter Dinklage story. I live near wburg Brooklyn and I think he must live there or near there. One day I saw a little person on a bike get cut off by an SUV and he punched the driver's side window... Well, it was Dinklage and instead of a horrible road rage incident the guy in the SUV just kept looking at him in awe and probably thinking "Tyrion Lannister just punched my window LOL"...
    Haha awesome.

    JACKDANIELSTANLEY.COM
    FREE AWARD-WINNING MOSTLY-HORROR SHORTS FROM
    DVXUSER, TRIBECA, SLAMDANCE, SXSW, TORONTO AFTER DARK, AND MORE...


    Reply With Quote
     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •