Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 22
  1. Collapse Details
    #11
    Default
    The other thing to keep in mind is that 2.8 is only available at the widest zoom setting. Once you start to zoom in, the aperture gets smaller. So F3.5 may have been the widest aperture available at the focal length being used.


    1 out of 1 members found this post helpful.
    Reply With Quote
     

  2. Collapse Details
    #12
    Member BONLEV's Avatar
    Join Date
    Oct 2013
    Location
    BELGIUM
    Posts
    54
    Default
    Quote Originally Posted by Larry Chapman View Post
    Per Barry's previous comment.....if you see STD the camera is in Auto-Iris. To get the smallest DOF set the lens wide open and adjust the other settings on the camera to get the exposure you want. Also, putting the camera in Macro mode seems to help get small DOF and zoom in as much as you can.
    thx for the tips. Now I set the iris manually wide open and let do the auto shutter and auto iso do the rest. Filmed this weekend inside a church and the footage looked great. Couldn't test this outside because the rain. For the communion I used manual focus with peaking. My subject was peaked yellow but the footage was a bit out of focus on my computer. When filming I changed the focus on the foreground subject so the backrground was not peaking and out of focus but this wasn't the result. Maybe I set the peaking too high and is this not accurate?
    panasonic DVX200, GH5s and HC-X920
    sony A7 and FS100
    gopro hero 7 black

    ryzen 3700x pc with 32gig ram
    moviestudio 17


    Reply With Quote
     

  3. Collapse Details
    #13
    Member BONLEV's Avatar
    Join Date
    Oct 2013
    Location
    BELGIUM
    Posts
    54
    Default
    1) when in autofocus and I manually turn the iris ring I get a white "peaking" color while turning. What's causing this? Because my peaking color is set to yellow and when switching to manual focus and focus assist it's indeed the yellow peaking.
    2) And I have a little black spot (some dust I think) in my viewfinder. is there a easy way to remove it?
    panasonic DVX200, GH5s and HC-X920
    sony A7 and FS100
    gopro hero 7 black

    ryzen 3700x pc with 32gig ram
    moviestudio 17


    Reply With Quote
     

  4. Collapse Details
     

  5. Collapse Details
    #15
    Member BONLEV's Avatar
    Join Date
    Oct 2013
    Location
    BELGIUM
    Posts
    54
    Default
    Quote Originally Posted by Barry_Green View Post
    1) is EVF DTL. You can turn that on or off.
    thank you so much Barry! and removing the dust inside of the viewfinder? I saw there are 2 small screws. Can I just unscrew them and take the viewfinder off to remove the dust?

    InkedS2130001_LI.jpg
    panasonic DVX200, GH5s and HC-X920
    sony A7 and FS100
    gopro hero 7 black

    ryzen 3700x pc with 32gig ram
    moviestudio 17


    Reply With Quote
     

  6. Collapse Details
    #16
    Default
    I don't know, hopefully someone else can weigh in on that question.


    Reply With Quote
     

  7. Collapse Details
    #17
    Member BONLEV's Avatar
    Join Date
    Oct 2013
    Location
    BELGIUM
    Posts
    54
    Default
    someone else can help me with the "dust" inside the viewfinder?
    panasonic DVX200, GH5s and HC-X920
    sony A7 and FS100
    gopro hero 7 black

    ryzen 3700x pc with 32gig ram
    moviestudio 17


    Reply With Quote
     

  8. Collapse Details
    #18
    Senior Member
    Join Date
    Feb 2009
    Location
    Long Island
    Posts
    9,037
    Default
    Probably best not to touch it. Sometimes there are multiple pieces of glass and you'll end up getting more particles/finger prints on them if you don't know what you're doing/not in a clean room.


    Reply With Quote
     

  9. Collapse Details
    #19
    Member BONLEV's Avatar
    Join Date
    Oct 2013
    Location
    BELGIUM
    Posts
    54
    Default
    Quote Originally Posted by NorBro View Post
    Probably best not to touch it. Sometimes there are multiple pieces of glass and you'll end up getting more particles/finger prints on them if you don't know what you're doing/not in a clean room.
    Ok I understand. But is there a solution for this?
    panasonic DVX200, GH5s and HC-X920
    sony A7 and FS100
    gopro hero 7 black

    ryzen 3700x pc with 32gig ram
    moviestudio 17


    Reply With Quote
     

  10. Collapse Details
    #20
    Member BONLEV's Avatar
    Join Date
    Oct 2013
    Location
    BELGIUM
    Posts
    54
    Default
    my problem is still here so is anyone out there to help me?
    panasonic DVX200, GH5s and HC-X920
    sony A7 and FS100
    gopro hero 7 black

    ryzen 3700x pc with 32gig ram
    moviestudio 17


    Reply With Quote
     

Page 2 of 3 FirstFirst 123 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •