View Full Version : Canon A1/G1/XH Camera Whips...
SalaTar
05-23-2007, 06:50 PM
Have you made a Whip for your camera ?
Ive been looking for a whip and come up dry.
Best I could find so far is HERE (http://www.tecnec.com/Product.asp?baseItem=TN%2D5C4A45P&cat=CABLESCONN&subcat=VIDEOCAB&prodClass=AVSNAKE&mfg=&search=0&off=) but it not exactly what I was looking for.
Any Ideas?
Barlow,
What ports are you using most of the time when tethered to your Kona?
SalaTar
05-24-2007, 07:28 PM
I would assume that someone has a whip for the camera they are using out there?
SalaTar
05-31-2007, 06:56 PM
interesting.....
SalaTar
05-31-2007, 07:15 PM
PaPa,
Have you made a whip?
I figured that some have .
ecking
06-01-2007, 06:28 PM
You should post this in the camera's actual forum if you want an answer, no one will see it here.
SalaTar
06-01-2007, 08:05 PM
it was a general question, G-1 and H-1 have about the same connections.
downsouth
06-02-2007, 03:33 AM
You might consider making your own....
Most electronic distributors will stock the audio/video cable. Order some "heat-shrink" tubing of the right diameter and length to enclose the cables.
I always call this a Snake...instead of a whip.
Jeff
Elton
06-02-2007, 07:34 AM
Salatar,
The Kona has a breakout cable with all the I/O connections built in. Most of the time I tether the camera with just the HD SDI cable, and sometimes analog RCA audio from the H1.
SalaTar
06-03-2007, 08:13 AM
Salatar,
The Kona has a breakout cable with all the I/O connections built in. Most of the time I tether the camera with just the HD SDI cable, and sometimes analog RCA audio from the H1.
Same as the Xena,
Im building a rackmount Breakout box for the G-1 for when its in those spaces I dont want to be in.
I was just looking to see if anyone around here had made one.