Can you adjust color settings (ie saturation, offset, gamma etc)? with HD100

[stephenlnoe]

The subject line says it all. Can you adjust everything about the way the color is handled in camera similar to the DVX100 with the HD100? I've read the lit but can't seem to find anything about color.

Thanks...

[Rocketeer]

Menu Pages with default values and adustment limits:

CAMERA PROCESS 1/2
Master Black Normal -10/+10
Detail Normal -10/+10
V/H Frequency Normal -5/+5
H.Frequency Middle (LOW MIDDLE HIGH)
V.Frequency High (LOW MIDDLE HIGH)
Skin Detect Off
Level -2
Black Normal STRETCH 1,2,3 NORM. COMPRESS 1,2,3

CAMERA PROCESS 2/2
White Clip 108%
Knee Auto
Level ..... SETTINGS: 80, 85, 90, 95 100%
Motion Smooth Off
Advanced process...

ADVANCED PROCESS
Cinema Mode Off WHEN ON, COLOR MATRIX AND GAMMA CAN NOT BE ADJUST.
Color matrix Standard/Cinema MATRIX CAN BE ADJUSTED FOR EACH STD/CIN.
Adjust ........... SEE BELOW FOR COLOR MATRIX ADJUST PAGE
Gamma Standard/Cinema
Level Normal (-5 TO +5) ENHANCES TONALITY OF BLACK
Color Gain Normal -10/+10 MAKES COLORS MORE/LESS DENSE
White Paint R Normal ADJUST RED COMPONENT WHEN IN AWB MODE -32/+31
White Paint B Normal ADJUST BLUE COMPONENT WHEN IN AWB MODE -32/+31
Skin Color Adjust (goes to another page)

COLOR MATRIX ADJUST (DIFFERENT PAGE FOR ADJUSTMENTS)
R GAIN Normal ENHANCES RED & CYAN -5/+5 SHADING
R ROTATION Normal ENHANCES RED & CYAN -5/+5 COLOR PHASE
G GAIN Normal ENHANCES GREEN & MAGENTA -5/+5 SHADING
G ROTATION Normal ENHANCES GREEN & MAGENTA -5/+5 COLOR PHASE
B GAIN Normal ENHANCES BLUE & YELLOW -5/+5 SHADING
B ROTATION Normal ENHANCES BLUE & YELLOW -5/+5 COLOR PHASE

[mezelf27]

And all these settings are to be saved and storen on the SD-card that comes with the camcorder? And also possible to store them under the "USER" buttons, I guess?

[Rocketeer]

Yes all adjustments can be saved to the sd-card.

User buttons 1,2,3 can only have the following assigned:

Bars
Preset Temp ie:wb prst is set to 3200 have User 2 set to 5600
BLACK: STRETCH 1,2,3 NORM. COMPRESS 1,2,3
AE Level+
AE Level -
(Cannot Assign to User 3, if you use these menu functions assign AE Level+ to User 1 and AE Level - to User 2)

[mezelf27]

Aha, well, at first I would need some small stickers to remember what I assigned them too, I guess. AE level and and WB (on 3 then) are quite handy though....