just got manhatten 8.9" LCD

[ecking]

is there such a thing as 1080 native?
is it going to be in Manhattan LCDs?

I don't think a full 1080p screen at that size exists. Also, at that size 1080 is irrelevant over 720 anyways due to extreme pixel density, that's pretty much been proven all the way up to 42".

[johnzo1995]

is there such a thing as 1080 native?
is it going to be in Manhattan LCDs?

There are 1080p native lcd avalible, but only for large sizes 22" and up.

Three years ago, Sanyo was going to come out with a 8" 1080p native panel. I took that with a grain of salt.... still not out.

[mcvideo]

Should've come with a manual; It's a couple of pages.

Ok, the only manual i received was the "myPower All PLus" for the Tek-Battery. (sigh)

[Jokerswild]

Just used my Manhattan 8.9 inch in a factory setting on my jib crane. It worked flawlessly and was extremely helpful while judging focus and framing and I must say the color balance was not all that bad either. I had my Tekkeon battery velcro'd to the back of the monitor. I wish I had a spare cable though for the Tekkeon, just for insurance. The one that plugs into the battery, with the other end going to the monitor...Can those be purchased separately? That battery lasted the entire day without being re-charged.

Also, I tried my battery that powers my Varizoom 7 inch TFT monitor and that works just fine also.

[keentave]

Has anybody used this for color correcting in Color? Or is this more for monitoring while shooting?

[BrianMurphy]

Just used my Manhattan 8.9 inch in a factory setting on my jib crane. It worked flawlessly and was extremely helpful while judging focus and framing and I must say the color balance was not all that bad either. I had my Tekkeon battery velcro'd to the back of the monitor. I wish I had a spare cable though for the Tekkeon, just for insurance. The one that plugs into the battery, with the other end going to the monitor...Can those be purchased separately? That battery lasted the entire day without being re-charged.

Also, I tried my battery that powers my Varizoom 7 inch TFT monitor and that works just fine also.

Yes they can. As a matter of fact I just ordered a spare from them. Check out the site they have other options for cables. I have two batteries and use them for the monitor as well as my zylight.
I also use mine with my kessler but keep the batteries in a meter pouch I bought at Home Depot.
cheers

[CW-35]

Hi,

I am in the market for an LCD for my 170. I am curious what the warranty & return policy is for the Manhattan LCDs?

Thanks.

[alexandroff]

I also use mine with my kessler but keep the batteries in a meter pouch I bought at Home Depot.
cheers

would be cool to see the setup pics :)

[Jokerswild]

I have an outtake photo from the shoot but not really sure how to attach a photo here....anybody care to give an "uploading photo" tutorial here?

[Gymnut808]

I just picked this bag at the local Best Buy:

http://www.bestbuy.com/site/olspage.jsp?skuId=9183322&st=targus&lp=10&type=product&cp=1&id=1218049005741

Fits the 8.9" monitor perfectly and I store the Tekkeon battery in the outer compartment. Not enough room to throw in the monitor and Tekkeon AC adapters, but otherwise a perfect fit.

[alexandroff]

here's my MLCD with tekkeon on Canon 5d mark II.
I got this cushioned bag for it at the "container store". i think it was $9 or so. fits perfectly

[johnzo1995]

Can you guys give me feedback on the sunhoods. How do they work? Thx

FYI I have a few HD089C prototypes left.

[MadHMC150]

I am really close to the address they have on the website... Its a house?! Sorry if someone posted about that...

I was wanting to check them out localy! Any info?

[mcvideo]

no feedback on the shade hoods?

[alexandroff]

no feedback on the shade hoods?
they are nice and simple
havent taken them into the field yet, but i'm sure they'll do just fine.

[robbz]

Is there any DVXuser forum discount at the moment?

Cheers

[Harry1]

Just got my shade in the mail today. It works as promised, almost: the drill pattern on my R side plate is off by 3/16". I'll be sending that piece back tomorrow.

Comments on the build: The shade is composed of 4 separate plastic plates attached by 2 plastic thumbscrews/plate. Not exactly the most durable accessory and not a quick on/off but OK for the price.... the thumbscrews will be the weak link in that they will eventually cross-thread. The mailing envelope could use an oversized cardboard to protect it better in shipping... mine was pretty battered when it got here. There is a stubborn adhesive strip in the middle of each plate, probably used to hold matching pairs together at the fabricators.

These minor issues aside, it's nice to have a custom shade ... for any outdoor shooting in daylight, the monitor is pretty useless without it.

[Harry1]

Sent MLCD an email re: mismatch in the R sunshade panel mount holes, and got a reply a few minutes later that a replacement was being sent out right away .... thanks MLCD!

[alexandroff]

yup, i had to drill another hole on my rpanel too

and clean the tape residue with nail polish remover

[Harry1]

Thanks for the nail polish remover suggestion. I was thinking about rubbing alcohol or Goop adhesive remover but they can sometimes react with certain synthetic materials.

[adolgin]

We are developing a 7V/12V battery adapter to power the monitor off the HVX batteries (also Sony L and Canon). The first few pieces will be available hopefully in the next 1 or 2 weeks. Anybody is interested in helping us out with testing the first pieces to verify the run time, etc.? It will look similar to EX-V (www.dolgin.net/EX-Vadapter.htm) adapter with a short cable at the end, will also have a power indicator to indicate charge level, and a few other nice features like soft start and electronic overload protection to make sure the battery is safe and not overloaded.

[Carcaridon]

I took my 89a out on it's maiden voyage. After shooting Part I of my web series without any monitor, I'm glad to say this thing performed like a champ. I got the addition Tekkeon battery for it and had way more than enough juice even after a full day of shooting. Very nice.

Might have to check out this sun shade.

[BrianMurphy]

We are developing a 7V/12V battery adapter to power the monitor off the HVX batteries (also Sony L and Canon). The first few pieces will be available hopefully in the next 1 or 2 weeks. Anybody is interested in helping us out with testing the first pieces to verify the run time, etc.? It will look similar to EX-V (www.dolgin.net/EX-Vadapter.htm) adapter with a short cable at the end, will also have a power indicator to indicate charge level, and a few other nice features like soft start and electronic overload protection to make sure the battery is safe and not overloaded.

Sent you an email. I am very interested and have a half dozen batteries that I am not using since buying my HMC150.
Brian

[johnzo1995]

We are developing a 7V/12V battery adapter to power the monitor off the HVX batteries (also Sony L and Canon). The first few pieces will be available hopefully in the next 1 or 2 weeks. Anybody is interested in helping us out with testing the first pieces to verify the run time, etc.? It will look similar to EX-V (http://www.dolgin.net/EX-Vadapter.htm) adapter with a short cable at the end, will also have a power indicator to indicate charge level, and a few other nice features like soft start and electronic overload protection to make sure the battery is safe and not overloaded.


Let us know when you have some production units avalible i would like to carry it on our store

-vinny

[adolgin]

PM sent

[robbz]

Just received my Manhattan HD monitor as well... Alex when youre ready to ship the battery adaptor plates I will buy one.

Cheers

[Richard J. Johnson]

Just got mine yesterday. Looks great. I only powered it on an looked through the menus but It is very well built.

[johnzo1995]

Guys, I have one used HD089A, $50 off, email me.

[Carcaridon]

I see people using the velcro idea for their tekkeon batteries and mounting them behind the monitor. Does this add any crazy weight problems with the monitor? I have my monitor mounted on the left arm of my RR shouldermount with their mount and the monitor placement works fine, but I never know what to do with the battery. I also have the second battery add-on for the tekkeon and think that it might be a tough heavy for the velcro idea.

Anyone mounting their battery differently?

[alexandroff]

i use RR micromount to mount this LCD on RR shouldermount and use velcro for the tekkeon (3 adhesive stripes), works just fine; no weight issues.

couple of batteries may be a bit overkill

[Harry1]

I just picked this bag at the local Best Buy:

http://www.bestbuy.com/site/olspage.jsp?skuId=9183322&st=targus&lp=10&type=product&cp=1&id=1218049005741

Fits the 8.9" monitor perfectly and I store the Tekkeon battery in the outer compartment. Not enough room to throw in the monitor and Tekkeon AC adapters, but otherwise a perfect fit.

I picked up a similar case based on your post:

TDC007US | Targus Sport 10.2” Ultra Mini Laptop Case
http://targus.com/us/product_details.asp?sku=TDC007US

$20 new. Picked one up for $9 on ebay.

It's a perfect fit, and you can slide the MLCD monitor hood plates into the inner sleeve. The 12V adapter will fit in the outside pocket, too. This is a good solution.

Now, I'd like a nice case for the Tekkeon and the accessories including an old laptop charger (note that the 3700 does not include a charger ... go figure).

[johnzo1995]

Now, I'd like a nice case for the Tekkeon and the accessories including an old laptop charger (note that the 3700 does not include a charger ... go figure).

you can use the 12v power supply provided with your manhattan monitor to charge the 3700

[Harry1]

Bless you, Sir.

[morganpl]

Are you still can promote 10% of monitors on the user forums? When the monitors will be available HD089C?

[johnzo1995]

Are you still can promote 10% of monitors on the user forums? When the monitors will be available HD089C?

We are offering 5% off, code 5OFFHD.

We are have software problems with the C, should be ready in two weeks.

[damienthedevil]

Hi all

I got one of the earlier version of manhattan 10.9 monitor. Is it any different from the 8.9 version? I am using the 12V battery pack and I have never run out of power till to date. In shoot I attach the monitor to a light stand or use the Swit swivel on my dolly or crane.

How do i attach Pix to show my monitor set-up?

cheers
Damien

[SergeSmArt]

Hi! I'm new here... and I'd like to know if someone from New York City here, on forum, who have Manhattan LCD HD089 B or A model ?? I'm in Brooklyn and will be happy to contact you as soon as possible, e-mail me to sergesmart@yahoo.com or call to 347-663-8553 any time. thanks in advance. Serge

[johnzo1995]

Attention all manhattan lcd users....
We are having some compatibility issues with the tekkeon mp3700 battery pack. more specifically the auto voltage sensing feature of this battery. it has been overshooting the voltage on our monitors as high as 20v causing dammage to our screens. if you recently purchased a kit with the MP3700 auto sensing battery option you can send us back the battery and we will exchange it for a mp3450 model. if you have any questions please email us at sales@manhattanlcd.com

[Harry1]

Friend, I specifically asked you this question on this forum a few weeks ago, because it seemed to me that the 3700 required a feeder voltage from the external device to sense its delivery voltage. You said that you tested the 3700 and it was fine (post #232). I have a 3700 here that I bought from Amazon based on your statement ... it's never used, but no longer have the original blister pack. Any chance of your swapping this for a 3450?

[johnzo1995]

Friend, I specifically asked you this question on this forum a few weeks ago, because it seemed to me that the 3700 required a feeder voltage from the external device to sense its delivery voltage. You said that you tested the 3700 and it was fine (post #232). I have a 3700 here that I bought from Amazon based on your statement ... it's never used, but no longer have the original blister pack. Any chance of your swapping this for a 3450?

Thats fine, we will take responsibility for these batteries. Go ahead and send it in and we will switch it for you. Tekkeon told us it will work fine with our monitor, but it doesn't.

[Harry1]

Wow, that's great. You guys are the best.

[johnzo1995]

Wow, that's great. You guys are the best.

Thanks we try :dankk2:

Also we have a new coupon code for dvxuser members
$20.00 off any order $499 & up it is good untill the end of the month
code = 20bucks

-Vinny

[bnims]

interested in the 7V/12V battery adapter to power the monitor off the HVX batteries. thanks

[NextWaveG]

I've been using the HD109A for a few months now and love it!

I talked about it in one of my videos:

YouTube (http://www.youtube.com/watch?v=-M_I98qL76k) | Vimeo (http://www.vimeo.com/4288388)

[bokser]

Meaning the marshall monitor has component out, so you can connect an hvx200 to the monitor and then output from there to a directors monitor for example.
Can the manhatten lcd output any signal or are those all inputs?

[powervideo]

Just two quick questions Vinny.

1. Do you have "C" versions coming in PAL or available now?
2. Can I power the LCD from my D-tap (this has been asked before) from a pro camera
V-mount battery. This may be from 10.9v to 14v depending on the charge.

Thanks,
Peter

[johnzo1995]

Just two quick questions Vinny.

1. Do you have "C" versions coming in PAL or available now?
2. Can I power the LCD from my D-tap (this has been asked before) from a pro camera
V-mount battery. This may be from 10.9v to 14v depending on the charge.

Thanks,
Peter

1. The C will be available in PAL, but still need a few weeks, waiting on new software.
2. The monitor requires 12v regulated power, we are getting battery plates for the monitor very soon that includes a power regulator. D-tap is not recommended due to the range of voltage.

The Tekkeon battery is the best option for the monitor, the 3450 will run the monitor for 4-5 hours.

[johnzo1995]

People of New York City

The HD089B's are avalible in Brooklyn

Photo 4 less Inc.
5417 New Utrecht Ave.
Brooklyn, NY 11219

http://www.sigma4less.com/ (http://www.sigma4less.com/)

[Zephyrnoid]

Congrats ! Lemme call my POC at B&H to see if I can rattle their chains a bit 4 ya.

[Yooni-Bomber]

People of New York City

The HD089B's are avalible in Brooklyn

Photo 4 less Inc.
5417 New Utrecht Ave.
Brooklyn, NY 11219

http://www.sigma4less.com/ (http://www.sigma4less.com/)

ooh...This is good to hear. Also, this has probably been discussed before, but will the 7.2's be available complete with housing?

[Yooni-Bomber]

Actually just picked up the monitor from the Brooklyn location...was cheaper if you pay cash.

The monitor works well for focusing and composition with the hpx-170.

[johnzo1995]

sorry the 7.2 inch hd screen has been out of production from sharp for over a year we will ave a 7.1 inch 1024x600 unit avalable in a month or so.

[SergeSmArt]

Actually just picked up the monitor from the Brooklyn location...was cheaper if you pay cash.

The monitor works well for focusing and composition with the hpx-170.


Hi, is it you, who bought it from Sigma4Less, and now wants to return it?
David told me about it, and I'd like to know what reason do you have? http://www.dvxuser.com/V6/images/icons/icon7.gif

I've got one for myself, to use with Canon 5D Mark II, and try it, but with video-cable, ( I don't have HDMI cable yet) , but I hope it will be even better....

Actually 5D2 in RECORD-mode gives us only 480i resolution, not 1080, but seems OK for focusing...

[Notlad]

After waiting a few weeks to see what the SmallHD pricing would actually be and then a couple of days ago seeing Ikan drop the price of their V8000HDMI by $200 down to $795 (further discounted at major online retailers) I finally made the decison tonight after reading a lot of this thread to take the plunge and order the Manhattan "A" 8.9".

I was so excited by checkout I opted for the two day Fed Ex to get it here a little faster!

Just so John knows what pushed me to go ahead an purchase now was his post offering the $20 off that expires tonight. Every little bit helps.

I like the idea of helping a small company grow and just experienced for myself the great customer service that I have read about on this thread. I called the phone number listed in John's posts to ask a question about the Tekkeon MP3450i vs the MP3450. I fully expected to get an answering machine as it is night time but John answered the phone himself and kindly spent a few minutes educating me. Made me even gladder I made the decision to purchase.

Now only if I had remembered to ask him when those Sony battery plates are going to come out! (maybe he will see this and post an update).

[johnzo1995]

We are offering a new coupon for dvxuser people, Free Fedex 2 Day Air, 48 States Only, Good untill end of month.

Code = 2DAY

[Notlad]

Johnzo,

Any date yet on when the Sony battery adapter plates will be available and how much they will cost?

[adolgin]

Notland, we are in testing stage for the 7.2/12v adapter. Looking at 8-10 weeks before it starts shipping. At that time it will become available through Manhattan as an option for ordering. It will be probably priced in the ~ $100-$120 range.

[alexandroff]

i will be selling my kit if anyone is interested here: http://www.dvxuser.com/V6/showthread.php?p=1626805#post1626805

all packaged up with nice accessories

[jjb]

Notland, we are in testing stage for the 7.2/12v adapter. Looking at 8-10 weeks before it starts shipping. At that time it will become available through Manhattan as an option for ordering. It will be probably priced in the ~ $100-$120 range.

Does this include the version for the Panasonic battery? I'll be in NY from May 17 till Jun 3 and I had hoped to buy one.

[adolgin]

It sure will have Panasonic, Canon and Sony configurations. But I am afraid it will not be available soon enough for you to pick up.

[Notlad]

adolgin,

I am going to try and hold out for the Sony battery plate. I have one outdoor wedding in a couple of weeks so I have to make sure there is a AC outlet there. If not I will have to go ahead and get the Tekkeon MP3450i.

[adolgin]

PM sent

[jaakkon]

Hi!

I was just wondering if it is ok to feed monitor (8,9") with 9 volts from tekkeon 3450 since it seems to be working ok?

[johnzo1995]

9 volts does work for some reason but the controller's spec says it requires 12v dc, 9v may cause some instability issues but it should not damage anything.

[adolgin]

Does this include the version for the Panasonic battery? I'll be in NY from May 17 till Jun 3 and I had hoped to buy one.
Here are a few beauty shots with the Panasonic plate.
http://dolgin.net/7-12_converter_2.jpg
http://dolgin.net/7-12_converter_3.jpg
http://dolgin.net/7-12_converter_4.jpg

[Sectaguy]

Here are a few beauty shots with the Panasonic plate.
http://dolgin.net/7-12_converter_2.jpg
http://dolgin.net/7-12_converter_3.jpg
http://dolgin.net/7-12_converter_4.jpg

Would you please let me know when you have a Canon plate available for sale through this post? Thanks!

[SergeSmArt]

I took a few pics of my setup: Manhattan LCD, ProAim FollowFocus with everything..

http://www.sergesphotography.com/old_site/pages/PhotoTech/Video_Kit/IMG_0293.jpg

http://www.sergesphotography.com/old_site/pages/PhotoTech/Video_Kit/IMG_0314.jpg

http://www.sergesphotography.com/old_site/pages/PhotoTech/Video_Kit/IMG_0680.jpg

http://www.sergesphotography.com/old_site/pages/PhotoTech/Video_Kit/IMG_0692.jpg

http://www.sergesphotography.com/old_site/pages/PhotoTech/Video_Kit/IMG_0696.jpg

http://www.sergesphotography.com/old_site/pages/PhotoTech/Video_Kit/IMG_0705.jpg

http://www.sergesphotography.com/old_site/pages/PhotoTech/Video_Kit/IMG_0297.jpg

http://www.sergesphotography.com/old_site/pages/PhotoTech/Video_Kit/IMG_0297_crop.jpg


The only problem I see so far - monitor HDMI controller don't work properly with 1920X1080 resolution, so - in Zoom-mode, preview looks ugly.. till I press the Set-button..
5D2 in recording show 720 X 480 resolution, so, ... the image fit screen perfectly..
I'd like to have preview in monitor to fit entire screen, when camera not start recording yet..
I hope the "Monhattan LCD" will make new firmware, which can fix this...

[johnzo1995]

I took a few pics of my setup: Manhattan LCD, ProAim FollowFocus with everything..

The only problem I see so far - monitor HDMI controller don't work properly with 1920X1080 resolution, so - in Zoom-mode, preview looks ugly.. till I press the Set-button..
5D2 in recording show 720 X 480 resolution, so, ... the image fit screen perfectly..
I'd like to have preview in monitor to fit entire screen, when camera not start recording yet..
I hope the "Monhattan LCD" will make new firmware, which can fix this...

Serge, nice pictures.

There is nothing wrong with the firmware of the controller, if you want 1920*1080 to show up properly you need to set the monitor to anaphormic which is 16:9, instead of "zoom". The "zoom" is not a standard aspect ratio thus why it does not look correct.

[Richard J. Johnson]

Sucks for me right now. I have the monitor and the Tekkeon Battery and can't use the damn thing because I don't have way to mount it anywhere. Next week I will buy a noga arm or the micro mount to attach it to my redrock shoulder mount. I have not even calibrated it yet.

[mcvideo]

i dont think you can use the monitor for true color viewing. composition and focus A+.

[johnzo1995]

FYI i just started an official thread in the hardware section for info on our on our monitors. it also includes a comparison chart of features and specs for our products.
http://www.dvxuser.com/V6/showthread.php?t=171096

[SergeSmArt]

Serge, nice pictures.

There is nothing wrong with the firmware of the controller, if you want 1920*1080 to show up properly you need to set the monitor to anaphormic which is 16:9, instead of "zoom". The "zoom" is not a standard aspect ratio thus why it does not look correct.


That is what you think... but I will show you what we are really have on it from 5D2 signal... I think better to do it in your new thread... so everyone interesting in it have to go there..

[manglerBMX]

i have found i don't use my monitor so i've put it for sale in the marketplace

http://www.dvxuser.com/V6/showthread.php?p=1640347#post1640347

[adolgin]

Now you can order a Manhattan through us here (http://dolgin.net/HD_Field_Monitors.htm) *Special introductory pricing (http://dolgin.net/HD_Field_Monitors.htm)*

[Thomas Lew]

I can't believe how long this thread got lol.

[adolgin]

We received the first few 12V battery adapters, available to order. As the adapter represents an addition to the vDoubler (http://www.dolgin.net/VDoubler.htm) family, it is called vDoubler-SPL; SPL stands for the single plate compact size. It comes in Panasonic, Sony, or Canon configurations. It is rated to provide up to 2A at 12V; just as a point of reference the Manhattan LCD HD089 uses about 1.2A. We also tested the adapter with the SWIT S-1070H monitor which uses even less than that. It can be mounted using several options, a special U-bracket is one of them. The small "fuel gauge" smart LED indicates available battery charge. In our tests here we were getting about 3 hours run time while powering a Manhattan monitor with a HVX style battery. Your mileage will vary, a good new brand name battery could do even better than that. At this point we are not shipping outside CONUS, a larger shipment in July or early August will ship worldwide.

[johnzo1995]

We are coming out with new Bright View models of the HD089A and HD089B. We are going to have a special coupons avaliable. $100 off. Stay tuned for coupon code.

The HD089A will be $399 and HD089B will be $499. We also have some new Batteries on the way, $60 each, smaller that Tekkeon with 2-3 hours run time.

[MadHMC150]

Great to hear!

So your saying there will be a $300 and $400 monitor after the coupon? Or have you all ready calculated the discount on those prices?

[johnzo1995]

Great to hear!

So your saying there will be a $300 and $400 monitor after the coupon? Or have you all ready calculated the discount on those prices?

No those prices include the coupon. Still a great deal.

[johnzo1995]

Here is the coupon for the HD089A which will bring the price down to $399 which is $100 off.

Coupon # brightview Very limited supply of 10 monitors. Expires 7/10/09

In the future the HD089A with the Brightview panel will receive a new part number. This is an upgraded LCD with higher contrast, brightness, and wider color gumat.

[Red Jacket Mike]

I've read this entire thread, as well as others where the Manhattan LCDs are mentioned, and I'd really like to get one for my 150; I'm concerned about how to mount it, and I'm not sure if I want to mount it on my tripod or on the camera itself.

There was some mention, and some photos of the Noga mounting arms, but no one has said specifically which one they use; I've seen a U-shaped model, which looks like it could mount to the threaded hole in the 150's handle, and the other end to the side or top mount on the monitor. Which model is that?

As far as mounting the monitor on the tripod, is there an arm out there with a clamp on one end, and a threaded end on the other with an elbow or two for flexibility?

I'm just curious as to what mounting setups others who have these monitors are using.

I'm looking at purchasing the HDO89C with the Tekkeon battery setup.

Any other suggestions out there? Thanks.

[johnzo1995]

I've read this entire thread, as well as others where the Manhattan LCDs are mentioned, and I'd really like to get one for my 150; I'm concerned about how to mount it, and I'm not sure if I want to mount it on my tripod or on the camera itself.

There was some mention, and some photos of the Noga mounting arms, but no one has said specifically which one they use; I've seen a U-shaped model, which looks like it could mount to the threaded hole in the 150's handle, and the other end to the side or top mount on the monitor. Which model is that?

As far as mounting the monitor on the tripod, is there an arm out there with a clamp on one end, and a threaded end on the other with an elbow or two for flexibility?

I'm just curious as to what mounting setups others who have these monitors are using.

I'm looking at purchasing the HDO89C with the Tekkeon battery setup.

Any other suggestions out there? Thanks.

Here is one at B&H that many of our customers use.

http://www.bhphotovideo.com/c/product/325440-REG/Manfrotto_by_Bogen_Imaging_143_143_Magic_Arm_Kit.h tml#reviews

[Red Jacket Mike]

Thanks--that one looks perfect, and I had not seen that particular model before. I will be ordering the monitor, battery and arm today.

[Marc Villafan]

Hey John, if I purchase a Manhattan LCD Kit can I purchase a Manhattan LCD Lithium Ion battery instead of a tekkeon battery for it?
Would this be everything I need (minus the enclosure) to have a working powered LCD monitor?

[johnzo1995]

Hey John, if I purchase a Manhattan LCD Kit can I purchase a Manhattan LCD Lithium Ion battery instead of a tekkeon battery for it?
Would this be everything I need (minus the enclosure) to have a working powered LCD monitor?

Yes, you can purchase the kit + Manhattan LCD LI battery, FYI we only have one of those batteries left.

We are also running coupons on the HD089A and HD089B for 10% off.

[Marc Villafan]

Yes, you can purchase the kit + Manhattan LCD LI battery, FYI we only have one of those batteries left.

We are also running coupons on the HD089A and HD089B for 10% off.
Thanks for the quick reply, you've just gained another customer.
By the way i'm not sure if your inventory amount is wrong or not, but you stated theres only 1 battery left. ManhattanLCD is showing you have 8 left.

[johnzo1995]

Thanks for the quick reply, you've just gained another customer.
By the way i'm not sure if your inventory amount is wrong or not, but you stated theres only 1 battery left. ManhattanLCD is showing you have 8 left.

Yes, Thanks. When the battery is purchased with a monitor, it does not deduct it from inventory, So i have to manual updated the accessorys.

[Marc Villafan]

Ah, if only I would've held off on ordering the Manhattan LCD kit! Would've been an extra 50 dollars off, hehe.
I barely started building it this weekend so it wouldn't have affected much.
Eh, oh well, monitors coming along great.

[adolgin]

We have 2 new HD089A monitors (http://dolgin.net/zen_dolgin/index.php?main_page=index&cPath=12&zenid=2cb5942d543d525367db4135f5ae9abe) in stock for a special price of $449.00

[lordybob]

I've been using the HD109A for a few months now and love it!

I talked about it in one of my videos:

YouTube (http://www.youtube.com/watch?v=-M_I98qL76k) | Vimeo (http://www.vimeo.com/4288388)

Whats the arm on that beastie? WHich arm package is the best?