Sos: Hvx200 > Mac

[RomanJaquez]

I have done this successfully in the past but I have three MAC and G5 and MAC Pro and a mac book. I've also browse other threats in there for answer and could not find anything .

I need to transfer the video out of P2 cards using the camera. I plugged the camera and the computer does not detect it.

I don't know if its a menu setting in the camera or the need of a software (I have the P2CMS software) but I have no drive to detected in the computer to browse in to).

Please help. The power book I used to have used to detect the camera as a hard drive I think. But now with either of the tools I have, I cannot do anything. PLEASE HELP. I am stock on a tim sensitive e project and need to get this done ASAP.

[mcgeedigital]

You ARE using the firewire connection in MCR mode, right?

[RomanJaquez]

Mcr?

[David Saraceno]

Again, are you using the firewire connect mode, and the MCR button?

Let us know because your reply had a question mark.

[RomanJaquez]

I have the camera connected to the computer via firewire. But what about the MCR button?

By the way thank you so much for helping me out.

[dantewaters]

I would like to think you have to switch it to MCR mode did it work?

[RomanJaquez]

So here is what i have done.

- PLug the camera to the computer.
- Power the camera on then switch to MCR mode
- Then I wait for the camera to be recognized in the computer but nothing happens.

[RomanJaquez]

Oh man! I was just forgetting to hold down the MCR button. I feel really s&*pid lol

Thanks again for your help and quick responses